The home is newly renovated, the bathroom with a wooden door, but only a few months later, the bathr

Questions Answered:1First of all, the wooden door of your house is not really made of wood, it belongs to wood products, wood products will expand and rot after being blistered for a long time, the door side of the door is pasted with a layer of skin, the expansion of wood products will cause the thin skin on the side of the door to fall off, the treatment method is to remove the door, scrape the bottom of the door with waterproof putty, and so on, polish it with sandpaper, and then wipe the dust with a dry cloth, brush with a layer of clear oil (transparent), pay attention to the corners must be brushed in place, otherwise it will enter the water and rot, After the oil is dry, brush it again, wait for the door to dry, you can install it, pay attention to the bath in the future, try not to get the water on the door, and wipe it dry with a dry cloth as soon as possible after getting it.

2.There are three reasons why the baseboard is blistered, one is caused by the paint applied to the walls of the house when it is wet. 2 is because the dust on the walls is too large before they are painted.

3. The paint has no waterproof effect. The solution for 1 and 2 is to scrape off the blistering area with a scraper, blow dry the wall, and then brush the remaining paint from the decoration to dry naturally, just fine, be careful not to get water on the wall before drying. The solution to reason 3 is to brush the waterproof paint from the new.

First of all, keep the bathroom dry, and when the door is dry, paint and waterproof. The problem of the wall is not easy to solve, because the wall is not waterproofed before tiling, this problem is difficult to solve, or there is no solution to the bottom. If it really affects the appearance, try to change some waterproof putty.

This is due to the fact that there is usually too much humidity in the bathroom. If you take a bath in the bathroom, you should effectively isolate the moisture, turn on the exhaust fan, and pump out the moisture inside in time.

Re-do it, the wooden door should be painted with primer, the bathroom should be fully tiled, and the floor tiles should be lower than the outhouse floor. Pay attention to the position when loading in the water.

The best way is to get a new door, but this is not a permanent solution, you should first find the reason, to see if the floor tiles are too high, or usually water will splash on the door, generally wooden doors need to be painted, or waterproof doors.

1. It is the best choice to replace the titanium-magnesium alloy door in the bathroom.

2. The bathroom should be ventilated and kept dry.

Look to see if there are any bathroom pipes and water seepage in the wall above the baseboard that is soaking you up.

The door was blocked with porcelain white glue, and the water could not enter.

Dude, there is a problem with the waterproofing of your home, and the door should not be woodwork, and the angle of the floor tile is not right.

These three points are generally at least two at the same time, and you can reinstall it if you can't do it!

It's best to change to titanium-magnesium alloy, once and for all. The price is 500 yuan or more, although it is a little expensive, but it is not worth it to always have a headache for the wooden door.

The next is analysis, prevention. If you want to go back to the way it was after, let's change the door.

1: The design of the wooden door is not good, and the waterproof is not in place. It's best not to splash water on the side of the door when taking a shower.

2: The water under the wooden door will not be clean for a long time, in fact, it is caused by insufficient waterproofing. Take a shower and dry the damp area on the door.