-
Anonymous users2024-01-24Hello! Replacement is the most thorough solution, if you really don't want to change, the crack is not too big under the premise can also be repaired, before the repair should be cleaned of the water, the traces of the last repair should be cleared, at least one day to dry the water vapor, and then use AB glue to fill the glue (this glue hardware store is available), before the bonding is best to use a hair dryer to blow the crack to ensure that it is dry, no stains, and the quality of the bonding will be guaranteed.
There is a leak around the bottom of the toilet, first overhaul the following aspects: >>>More
There are two ways, one is to move the toilet and re-dock the interface below, the key is to make the sealant or pad carefully. The second is to squeeze the sealant directly on the bottom of the toilet bowl where the water is sprayed, not too much, just paste the seam, this method is simple and easy to operate.
Siphon toilet principle
Is the smart toilet good >>>More
1. Scrape off the glass sealant on the contact between the base of the toilet bowl and the ground; >>>More
There is a gasket at the interface between the toilet and the sewer line, and if the toilet is not damaged, it is probably this deformation. Remove the toilet and remove the gasket, and it is best to buy a general new one and replace it. Then reset the toilet bowl and put sealant around it.