-
Dry quickly with a cloth Solid wood floors are best carpeted.
-
Immediately dry mop and dry the gaps with a paper towel.
-
Just wipe it dry with a dry rag.
-
Solid wood flooring is prone to deformation and mildew after absorbing water, and the treatment is as follows:
1) After the solid wood floor is soaked in water, the surface water should be wiped dry as soon as possible, and the vacuum cleaner can be used to aim at the splicing gap of the soaked floor at the same time to absorb the water vapor. Or take a hair dryer and blow the splicing seam with cold air until it dries, but do not use hot air to prevent the surface from drying and drying the surface.
2) If the solid wood floor is soaked in water in a large area, then after the surface layer is treated, the floor can be carefully pried up, wiped dry with an absorbent cloth piece by piece, and placed in the shape of a "well". Under normal circumstances, as long as the damage is not serious, the rescue is timely, and the floor is dry, it can be re-paved by professionals to continue to use.
-
Just wipe it dry, it's not so delicate.
1. If the scratch is not deep, mix it with varnish and color powder, wipe it on the scratch, polish it with fine sandpaper, and wax and polish it. >>>More
Wherever solid wood flooring is used, the top of the floor will be waxed, and the wax will also seal the gaps in the floor, and if you accidentally spill water on it, it will be fine for a long time. >>>More
No, the solid wood floor is closed with paint all around, a little mung bean soup into the gap, as long as the air conditioner is turned on, or other heating equipment is used to raise the temperature of the room appropriately, the moisture of the mung bean soup will be good after volatilization. >>>More
Alcohol is very volatile, it will run away on its own, well, it will dry out and leave nothing.
Find a painter to hang putty, paint and varnish, but it doesn't matter how long, if it's on the passage, if it's in the corner, it's better. >>>More