-
Anonymous users2024-01-24You can buy a small bottle of pipe silk glue (also called anaerobic glue) and touch it at the wire mouth to dip the triangle valve, and you can use water after 4 hours. This glue is dedicated to sticking pipe threads. It's mine.
-
Anonymous users2024-01-23If you already have a crack, you can't use it.
Get a new one!
-
Anonymous users2024-01-22It has to be replaced, or there will be no problems.
They are all positive buckles, which are in one direction, and are tightened clockwise when screwed, and loosened counterclockwise.
The main water pipe is leaking, and you need to find a property to deal with it. >>>More
To check if the toilet inlet valve is back in place, it's actually very simple, pat it on the toilet tank lid with your hand to see. It is really not possible to replace a good quality water inlet valve, which is installed in the toilet tank.
The water pipe is the pipe for tap water, the pipe for daily life, the household water pipe is generally less than 5 cm, and the water pipe is the drainage pipe is generally thicker than 5 cm, which is the pipe used in daily life to discharge wastewater. The waterway is set up unreasonably, and the waterway sometimes needs to be changed during decoration.
1. The iron pipe with a diameter of 2 cm is leaking but the iron pipe is not embroidered, but only part of the position is damaged, close the main valve of the water pipe, and only need to replace the iron pipe at this position! Cut off the water pipe at this location, use the wire with the instrument to the thread, and connect the head on the street! >>>More