-
Anonymous users2024-01-24Use a suction cup to remove any board around, if there is no suction cup, you can use a small screwdriver to pry, but be careful, don't scratch, and then press out the lamp from top to bottom, buy a new lamp and replace it, this time don't buy cheap miscellaneous goods.
-
Anonymous users2024-01-23Use a suction cup to remove the lamp from the side by removing it.
The ceiling is rectangular and not otherwise fixed. If you are afraid of hurting the aluminum gusset ceiling, you can take the wallpaper blade and slowly pry it down along the seam (next to the lamp position). When you change the lamp and want to restore it, you can align the seam and push it up, and it's OK.
Wiring is relatively easy.
The wire of the lamp and the wire corresponding to the power cord are twisted together. >>>More
You are an aluminum gusset ceiling, very simple, he is directly stuck in, next to the lamp casually, insert a blade into the seam, slowly pry open, you can stick your head in, the lamp can be taken down,
Most of the time the drive is broken, turn off the power, buckle it down, just change the drive, and the two wires don't need to be connected directly to the neutral line.
Buy a tube, buy a suction cup, remove that ceiling and you can replace it.