-
Anonymous users2024-01-24The toilet hole spacing is not large or small, but the most suitable. The general hole spacing is now 30-40 this size. Of course, there are also 28 and 45 houses, and generally new houses are 30-40.
It is best to buy according to the specific situation, and it is best to do a good job of tiling the size in the early stage, so that you can buy a good toilet according to the size of the beginning, which can prevent the toilet from being unsightly (flash seams or small spacing). Too big is easy to cause hygienic dead ends, and too small will lead to a narrower range of toilet options!
-
Anonymous users2024-01-23It is recommended that the big ones are better and the smaller ones are better. Super easy to clog.
-
Anonymous users2024-01-22The hole spacing should be about the same size as your drain pipe. It's too big, the drain is so big it's useless, it's too small, and the water flows slowly.
The hole at the bottom of the toilet is very small, as long as you press it in with that kind of strip-shaped mop, it will be blocked, and if you put the water again, the water will not go down, and then pull it out violently, and the toilet will be opened, and I used this method when the toilet was blocked. >>>More
It should be called "pit distance". Refers to the distance from the drain of the toilet to the wall.
1. Pull burst bolt fixing method, this method is designed for toilets with mounting holes at the bottom. >>>More
It doesn't make a difference what brand you buy. It's just that the big brands are all with a hole, and some styles don't.
The working principle of the flush toilet is based on the principle of the water circulation system, and the size of the normal hole does not have much effect!