Why do toilets stink?

The initial decoration of the bathroom is very important, because the decoration at this time should take into account the problems of waterproof, odor prevention and so on. Many people find that soon after installing the toilet, it will smell, why?

This is what my toilet base looks like after it is disassembled, it has been smelly for three years, so disgusting.

Let's talk about the four main reasons why the toilet stinks:

1. The quality of the toilet product itself is poor, and the void of the toilet is large, and there are a lot of stains left in it.

2. The project was not done well during installation, and the flange ring under the toilet was not sealed.

3. The base of the toilet is not sealed, or the glass glue of the base is not done.

4. There are some firing holes in the toilet base, but these holes are not sealed, and the smell comes out.

The solution of Article 1 is that we can only buy toilet products with better quality, and we can buy better glazed products.

Article 2 suggests that you should use glass glue for the flange, and when you use this kind of glue, you should use water to flush it with water to see if there is any leakage.

Article 3 Most of the toilets that we sleep on now do not use cement to seal the bottom, most of them use glass glue, and we must pay attention to not break it when playing glass glue, and we must play it completely in a whole circle.

The base of the fourth toilet bowl usually has two or three firing holes, and many people don't know about it. Some merchants do not treat the product when it leaves the factory, so after you install it, the smell of the toilet will flow out of the holes here, so we have to seal these holes.

This small suggestion, in fact, installing a toilet is a kind of technical work, even if the worker is skilled, it is not as good as installing it yourself. When you buy a product, you can also let the merchant package install it, so that you can save the installation fee.

It should be noted that if you want to lay the floor tiles and then install the toilet, this is the correct installation sequence.

1. First consider whether it is not cleaned, or whether there is a blockage. If this is the case, then we need to clean the toilet bowl in time and use toilet cleaner and disinfectant to do a deep cleaning of the toilet. Alternatively, we can place solid toilet balls or blocks in the tank to help keep the toilet bowl clean.

2. If there is still a peculiar smell after cleaning, it is necessary to check whether the water seal can remain normal after flushing the toilet. If there is no normal water seal after we have flushed, it means that the toilet itself is not in reasonable structure or has been damaged, and the toilet needs to be replaced or repaired in time.

3. If the above two methods do not work, it may be that the connection between it and the sewer is not close enough to cause it to smell. There are many reasons for this situation: first, the operation of workers is not standardized when installing toilets; the second is the aging of the sealing rubber ring; The third is the defect of the toilet itself, that is, the structure of the connection port is slightly short, and there will be gaps after installation.

According toMaster Bang Summing up past experience, there are mainly the following reasons for toilet smell:

1. The dirt is discharged by siphon, the siphon pipe is bent and bent, the sewage stroke is long, the discharge is not smooth, it can not be completely flushed, the stool is left, the urine is only diluted, and there is always dirt left in the toilet, which will produce a foul smell for a long time.

2. The sewage outlet of the traditional toilet ceramic body is directly connected with the sewage pipe, so that the ceramic body will continuously absorb the dirt of the sewage pipe, and the odor of the sewage pipe will be continuously discharged after a long time.

3. Relying only on the water seal to prevent odor, the water seal itself has no sealing ability. Upstairs flushes, downstairs toilet bubbling and stenching back. Due to the blockage of the main sewage pipe, a large amount of sewage is poured back and overflowing, and the pollution of the living room occurs from time to time.

4. During use, the stool will be discharged, and the water seal will be discharged to the sewage pipe, and the stool will be exposed and emit a foul smell.

5. No one is at home for a long time, and after the water seal evaporates, the odor is poured directly into the living room.

6. The siphon diameter is small, the channel is curved, and when used, it is often blocked, and it is very embarrassing to look at the stool and cover your nose to go to the toilet!

7. At least 6 liters of water in a water tank, after the switch is opened, a large amount of water will be flushed instantly, which will cause a large number of bacteria and viruses to spread throughout the room with the aerosol, emitting a foul smell and endangering the health of the whole family.