-
Anonymous users2024-01-24Acceptance of mahogany furniture needs to pay attention to product materials and appearance:
First, the use of materials inspection.
1. The timber used in the product shall be consistent with the name of the tree species or timber required in the order.
2. The wood used in the product should be dried, and the moisture content should be 8% to 16%.
3. The material used for the front surface of the product should be free of white skin, and the sapwood area content of other parts should not exceed 1 10 of the surface area of the part (the edge with a width of less than 8mm is not counted).
4. The material used for the front face of the product should be basically the same as the color difference and wood grain.
5. The internal materials of the product can be repaired without affecting the strength of the product, such as slight surface cracks, dead joints below 1cm, etc., which are well repaired and not obvious.
6 Hardware accessories inspection:
1) Whether the shape, material and color are consistent with the requirements of the invoice;
2) Appearance: no rust, no poor plating, no sharp edges, no pits, no deformation, no bruises.
Second, the appearance of the product inspection.
1. Carpentry requirements.
1) The mortise and tenon joint should be tight and firm, and the maximum gap should be tight, and there should be no loosening, broken tenon and cracks.
2) There should be no gaps and obvious looseness of the loading plate (such as the door frame and the door panel).
3) The finishing should be delicate and delicate, without obvious processing defects, such as no chipping, cracking, damage, etc.
4) All edges and corners that can be touched by people and can cause scratches on the human body should be inverted, rounded and sanded.
5) The installation of hardware accessories should be complete, the position should be accurate, firm and smooth, and the installation should not have few pieces, and it is not allowed to loosen, leak nails and through nails.
6) The carved parts should be complete and clear, excessively sleek and layered, and the symmetrical parts should be symmetrical, and the bottom of the shovel should be smooth and clean, without collapse and knife marks.
7) The line processing should be uniform, straight, symmetrical and smooth, without chipping and knife marks.
8) The fillet processing should be symmetrical, smooth and smooth, without missing corners and knife marks.
9) No bruises.
10) Other inspection items refer to the quality standards for material preparation and assembly.
See whether the mahogany furniture is stable, whether the structure is firm, and whether the interface is tightly fitted.
First of all, be sure to go to the mahogany specialty store in the large furniture store, and bring a professional (or a mahogany master) to pick it up, if the layman may buy a counterfeit product.
Find a reliable and well-known brand and visit the factory. When purchasing, you can choose from the modeling design, material, technology, etc., and many key details, such as the drawer bottom plate, beveled edge, the back plate of the cabinet and the mortise and tenon structure connection part.
1. First of all, you must understand what furniture you need, whether it is a bed, sofa or dining table... >>>More
1. New furniture deodorization and ventilation method.
This is a well-known method, which is as simple as opening doors and windows to allow the air to circulate naturally. It is usually about 2 hours to open the window when the sun rises in the morning. >>>More