-
Anonymous users2024-01-24This depends on what the purpose is, there are many commercial kitchens due to functional requirements, and a lot of pipelines need to be lowered in the surface layer.
It may not be needed for general household use.
You are the construction party and should ask for clarification on questioning the design representative in person during the review of the drawings. If it is omitted at that time, and there is any doubt during construction, you should question or consult the designer in time, how can this drawing guide the construction? This is the legitimate duty of both parties.
That's right, yes. The structure is 4CM lower, and there is a building screed on it, and the water is discharged, and there is 2CM left after the protective layer, but this is 2CM that can't do these.
Solid wood particle board is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. Its production process is the same as that of particleboard, which is stronger than ordinary particleboard and powdered MDF, with stronger nail grip, bending resistance and stability. >>>More
It depends on the reason.
Seeing this, I roughly think about it, the kitchen equipment must be more than one, but many, the total load is 1000KVA, so it is recommended that you use a transformer alone when designing this, it seems that I calculated it, simple 1000KVA electricity load, some current, such a large current, and the load level of the kitchen is definitely not three, it is recommended to use the mother card. Of course, there must be more than one electrical equipment in the kitchen; It is also possible to use a pre-branched cable, because the allowable current of the pre-branched cable is relatively large. And it is convenient to install, here I choose a separate transformer to supply him with power and choose a 1250KVA transformer (model style you set yourself), the bus wiring method on the low voltage side is a single bus bar is not segmented, the mother plate is selected copper mother, the temperature is set at 40 degrees Celsius, and the mother plate of 125X10 is selected. Able to power all the appliances in the entire kitchen. >>>More