-
Anonymous users2024-01-24There's a horizontal pump inside.,You move it.,Try it.,The toilet flushing in the dormitory before was also like this.,It's that it often doesn't come out of the water or leaks.,That's how it's done.,I don't know if yours will be the same.,But you can try it!
-
Anonymous users2024-01-23The blue one didn't rise into place, so it needs to be pressed a few more times!! Or change the inside, you don't have a lot of money, you can change it yourself!! Otherwise, there is always such a problem, aging, press it several times each time!!
It can be removed from the bottom of the outer part of the tank.
There is a ball in the back cover of the flush toilet When the water is full, the ball will float The button is in a pop-up state When you press the button, the water will be released and the ball will go down Then it will be filled with water like a faucet The water will float up when it reaches a certain position The button will also pop up Depending on your situation, it is estimated that the water pressure is not enough to inject water or where it is blocked and cannot put water or the ball is stuck.
The water inlet switch in there is broken, just buy an installation in the building materials store, you don't need a professional master, you can do the installation yourself!
Is it a "plug" leak? If you soak in water for a long time, it will shrink and you can't seal it, it's not that you can't get water, maybe the water will leak down.
There is a butterfly valve in the water tank, which relies on the buoy above and below the water level to control the water, and if it is broken, it can be manually closed and fixed temporarily, and then find maintenance personnel to deal with it.