-
Anonymous users2024-01-24There are indoor models of water heaters, and there are also special outdoor models, you can choose the location and buy the corresponding model.
1. There may be a problem with the hose of the hot water pipe. Directly remove the hose of the water heater and turn on the water heater, if it works normally, continue to overhaul the pipes other than the hose, if the hot water still cannot be produced, overhaul the pipes inside the hose. >>>More
In this case, it should be when the water pipe is replaced, when the water pipe is hot-melt welded, the melted part is squeezed and blocked or occupies too much space on the inner wall of the pipe.
This will not waste you any gas, if you are the kitchen and bathroom are hot and cold water pipes, connected to the balcony hot water pipes, the balcony hot water pipes are not used for a long time, and it is only the branch water of this section is cold. (The hot water of this water heater is where you use the hot water pipe, and where the hot water flows, but there will be a section of cold water in the water pipe, and there will be hot water when this water is discharged.) ）
If the hot and cold water pipes in the bathroom are normal, and the kitchen hot water pressure is low, and the water heater cannot catch fire, it means that the kitchen hot water pipe is blocked and cannot be passed, or there are things in the pipes, or there is scale, or it is possible that the valve on the kitchen hot water pipe is too small to open, or it is broken, etc., which will cause the kitchen hot water pressure to be low and the water heater silver finger cannot catch fire.
To be sure, you didn't connect the ground wire; All electric water heaters must be connected to the ground wire and anti-leakage switch. >>>More