How to touch up the paint on solid wood floors

Updated on Solid wood 2024-07-25
4 answers
  1. Anonymous users2024-01-24

    You can use the brush included in the touch-up pen and apply it directly to the solid wood floor, and for deeper scratches, you can repair it after repeated application several times. Under normal circumstances, if the floor is waxed 4 times (once every 4-6 months), it will not burst the paint. If the floor you buy is not waxed within a year, and there is no artificial hard injury, it must be a floor quality problem.

    Because the paint brush is used to repair the paint by the method of painting, so it is very different from the professional painting process, so there will be a little color difference with the original paint after making up, and wait for 2 to 3 days after the paint film is completely dry, and then use 2000 water sandpaper or abrasive for grinding and polishing The polishing effect will be better.

    1. When repairing scratches on the floor, the dust and stains in the scratches should be cleaned first.

    2. Glue tape on both sides of the scratch to be repaired to prevent the repair agent from sticking to the surface of the floor outside the scratch.

    3. Bring out the same color and complementary color as the original floor color.

    4. After the color is filled, use a professional floor repair solution to repair the floor.

    5. After the floor repair agent is dry, paint the floor (note: it should be higher than the surface of the original floor) 6. After the paint is dry, use a special knife to level the floor and restore it to the same as the original floor. 7. Then oil and wax the floor.

  2. Anonymous users2024-01-23

    1. For smaller scratches (such as small stone chips, slender hard object scratches), as long as you buy a paint repair pen, you can apply it directly to the scratches with the included brush, and for deeper scratches, you can achieve the ideal effect as long as you apply it several times.

    2. Because the paint brush is very different from the professional painting process, there will be a slight color difference with the original paint after the paint is filled, and the paint film will be completely dry for 2 to 3 days, and then use 2000 water sandpaper or abrasive for grinding and polishing The effect will be better.

  3. Anonymous users2024-01-22

    It should be a quality problem, under normal circumstances, if the floor is waxed regularly for 4 (once every 4-6 months), it will not burst the paint. If you buy a floor that has not been waxed within a year, and there is no artificial hard injury, it must be a floor quality problem. It's best to go to the flooring dealer and ask him to re-install the material for you, and if the other party is tough, then you go to the consumer association.

  4. Anonymous users2024-01-21

    It should be a quality problem, under normal circumstances, if the floor is waxed regularly for 4 (once every 4-6 months), it will not burst the paint. If you buy a floor that has no waxing and no artificial injuries within a year, it must be a floor quality problem. It's best to go to the flooring dealer and ask him to re-install the material for you, and if the other party is tough, then you go to the consumer association. Concealment.

Related questions
2 answers2024-07-25

Solid wood flooring will have a little bit of a gap Because solid wood floor is a natural thing, there will be shrinkage when encountering different air humidity and climate, if the floor gap is really large, this must be installed solid wood to adjust, generally small gaps you increase the indoor humidity will be bonded, solid wood flooring brand Draco will answer for you

1 answers2024-07-25

Grinding, after grinding off all the original paint, then coloring, priming, then lacquering, then waxing, polishing; The room needs to be temporarily vacant;

1 answers2024-07-25

This is the case in winter (if you have done maintenance, you can avoid it). >>>More

2 answers2024-07-25

If it is plain paint, use the same color paint to repair it, the paint should be filled a little more, and then cut off the excess with a blade after drying, and then grind it with sandpaper, and add water to the polishing stone. >>>More

2 answers2024-07-25

Hello, the steps of the method of paint-free floor renovation are as follows: >>>More