The bottom of the toilet is leaking, and the remaining water in the bucket tank has been slowly decr

In fact, it is very simple to investigate, and follow the flow to find it. Troubleshoot step by step. Open the main valve [also called the angle valve] to determine whether there is tap water, open the water tank cover, and observe that the water tank is not watered.

Whether the piston can be plugged. If you can't plug it, the water tank will leak, and the switch is not enough, so you won't get on the water, and the toilet tank accessories are divided into three parts. The first is that the drain valve is directly below the button, and the second is the inlet valve, which is the part of the hose connected to the outside of the water tank, which is generally next to the drain valve.

The third part is that the buttons are divided into full-row buttons and half-row buttons. Close the toilet lid and see if the button can reach the inlet valve, if so, adjust the inlet valve to see if the float or float of the inlet valve can move up and down freely. If you get stuck, the water won't get in.

Usually there are adjustable crosseyes on the pontoons, and you can twist them in a clockwise direction to see. If the float is suspended in the air when there is no water, it means that it is broken and the water inlet is blocked. Fill the tank with water to see if the pontoons can float freely.

If the problem of water inlet is solved. Then there is the problem of drainage, which is also the problem of flushing. See if the plug of the plug in the tank, also called the float, is damaged.

Whether the float and button connection are loose. If it is loose, just tighten it and see if the button is elastic. It is easy to rust when the spring enters the water for a long time.

The working principle of the toilet is nothing more than pumping--- storing water --- releasing water. Just a few things, step by step.