Solid wood floor to buy boards

Many friends have bought solid wood flooring and found that there is some color difference, and the gap has increased after one year of use.

The reason: the solid wood floor may be because of a certain wood species out of stock resulting in the wrong color, or it may be that the solid wood floor is taken from natural scarce wood, and there will be a large color difference in the texture and color, so the difference in the overall effect after paving is even more obvious. In addition, the purchase of solid wood flooring is very important, and the installation is also very important.

Blistering and cracking in the later stage of floor use are generally caused by hiring an inexperienced decoration team for construction, and it is relatively difficult to identify responsibility, and in most cases consumers can only suffer dumb losses.

Buy flooring, touch it, smell it, weigh it. In general, a floor with good wood quality, good paint quality, good processing quality, clear texture, and smooth feel is a good floor. When choosing a floor, you should first feel whether the paint of the floor is full and whether there are any leaks; Then see if the surface of the floor is flat; Then smell the floor for any peculiar smell, if the smell is pungent, it must be an unqualified floor; Finally, weigh the weight of the floor, take a few more floors and put them together to see if they are even in the gaps between them.

First, it depends on the tree species.

There are many tree species, due to the different growth environment of wood, the material of the same tree species is slightly different, precious, general, cheap, and the price difference is very large. But not imported materials are better than domestic materials, some manufacturers for promotion, the wood is crowned with a variety of good names, such as cherry, rosewood, gold does not change, jade sandalwood, etc., even more, with low-grade high-grade wood, be sure to check whether the name of the tree species is commonly used wood floor standardized commercial name, there is to choose the color of the tree itself as much as possible, in case there are some problems in the long-term use process.

Second, it depends on the quality of appearance.

Once you have checked whether the selected flooring belongs to the same species, it is time to see how the quality and pattern of the flooring are. For example, look at the surface of the floor for decay, dead joints, loose joints, cracks, fungus, insect holes and other defects, as well as the finish of the paint film, whether there are bubbles, paint leakage and wear resistance. Since the wood floor is a natural wood product, the phenomenon of uneven color difference and pattern is unavoidable, which is also the feeling of returning to nature brought by the solid wood floor, and the color difference of the floor can be adjusted slightly as long as it is paved.

Solid wood flooring is not as long and wide as possible, and floors that are too long or too wide are relatively easy to deform, so it is recommended to choose a floor of moderate length to avoid deformation.

Third, we should look at the moisture content.

The moisture content of wood flooring is very important. When buying flooring, be sure to determine the moisture content. The national standard stipulates that the moisture content of wood flooring is 8% 13%, in fact, China has a vast territory, and the moisture content requirements are different in different regions.

Generally, the dealer of wood flooring should have a moisture content tester, if not, it means that the technical index of moisture content is not valued. In addition, the moisture content of the selected wooden floors in the exhibition hall is measured at the time of purchase, and then the unopened ones are measured.

Nature flooring, Fusen flooring, Anxin flooring are all three. The width is determined according to the size of the room in your home.