After the toilet tank was full, the liquid level began to drop slowly, and I don t know where it lea

After the toilet tank is full, the liquid level begins to slowly drop, and after a certain level, it does not drop again >>>More

Hello, make a suggestion, if you don't know how to drum, you can go to the place that sells toilets and ask at that time. In fact, it is very simple, the left side of the picture on the left is for adjustment, as long as you can turn it on and slide the water down, it will not be good. Because it is normal not to get it if you haven't touched it, and the upper button on the toilet tank lid is not good for water, your current problem is that the button of the water tank lid is down, you can solve it by looking at it. >>>More

x0d x0a pulls the water drift up with his hands, and looks at Jing Jing to see if there is still water ingress, if not, it means that the position of the water drift is not suitable. At this point, it is enough to lower the water drift position, which can increase the buoyancy to close the inlet valve port. If there is still water inlet after lifting the water bleaching, it is very likely that there is a problem with the components of the automatic water inlet valve, and you have to ask the water master to come to Liangnian to check and repair. >>>More

This problem is caused by the water level of the water filler in your tank being too high. When the water level is too high. Will always be filled with water. >>>More

The photo is a bit blurry, if I'm not mistaken, turn the blue strip to the white and rotate the white strip to the right (the one on the far left side of the blue strip near the water tank).