What are the methods of parquet installation, specifically

There are four ways to install parquet.

1) Keel pavement method: that is, the wooden keel and plastic steel keel pavement method, which needs to be made of wooden keel.

2) Suspension pavement method: that is, the use of moisture-proof film or moisture-proof mat to install, this method is currently more popular.

3) Direct pasting method, that is, environmentally friendly floor adhesive paving method.

4) Wool floor mat method.

This is the main installation method of parquet, depending on the installation method, different tools and materials are required.

1) Before the floor is installed, the parquet is in place, and the installer needs to first check the number of floors and accessories with the customer, and check whether there is any damage, and ask the customer to sign for confirmation. Then, check the amount of flooring, the flatness of the floor, the use of auxiliary materials, etc., and wait until everything is confirmed to be correct before installing.

2) After installation, we must pay attention to acceptance, mainly that the surface of the parquet should be clean, no burrs, grooves, no defects in the corners, full paint surface, no paint leakage, and firm laying.

First, the installation method of parquet.

1.Determine whether the ground is flat, local unevenness can be done local leveling, if a large area of unevenness should be considered to do self-leveling, the installation and use effect of parquet has a great relationship with the flatness of the ground.

2.If there is no problem with the floor, you can lay a special floor mat and directly pave the floor.

3.Parquet has no keel, no nails, no glue. There should be an expansion joint of 8-12 mm between the floor and the wall, and spring steel sheets and springs should be added. Per 100 square meters: about 40 steel leaf springs and about 200 springs.

4.During installation, it is best to cover the installed part with cardboard or something else at all times, because this is how many scratches occur.

5.Clean the floor immediately after the end and do floor maintenance in time.

Second, the installation method of solid wood flooring.

1.The keel is laid, and the spacing of the keel is determined according to the length of the floor. BUT IT IS BETTER NOT TO EXCEED 400MM.

2.Pay attention to check the keel fixation, be sure to check carefully and repeatedly, once the keel fixation has a problem, it is very troublesome to repair it later.

3.Attention should be paid to leveling in keel installation, and the concave and convex parts of the ground should be dealt with. Whether the keel is leveled or not is related to the stability and comfort of the floor.

4.The floor installation method is divided into 1 and 2. The specific situation is determined according to the room area and floor specifications. It is best to seek the advice of a master carpenter, who is very experienced.

5.If you are using wet wood, you must wait until the wood is completely dry before installing the floor.

6.Cover the installed part at all times to avoid scratches.

7.Maintain your floors in a timely manner.

All kinds of flooring installation are carried out in a few steps:

1. Check the flatness of the ground, the flat ground can make your ground paving more convenient, and also prevent the uneven floor.

2. Lay the floor mat, because the parquet does not need to erect the keel like the solid wood floor, therefore, as long as the floor mat is laid, the floor can be directly paved.

3. Avoid scratches, stains, etc., during installation, for the sake of the beauty of your floor.

4. Try to find a good team to lay the floor, such as the well-known domestic laying team with the floor laying team of some large enterprises such as Shengxiang and Beyak, and the laying effect is better.