-
You can't use a siphon toilet on the first floor, but your one is a straight flush type, which won't affect the flushing effect, no problem.
-
The distance from the wall to the pit is 30 and 40, so measure it yourself.
Generally, the toilet reserved position size is: 38 40CM from the wall, and the installed toilet measurement distance is generally in the toilet fixing screw hole (there are two fixed holes) The position is the middle of the drain
The back of the car roughly means "plumbing repair service". >>>More
You try to turn the water level of the tank lower. The water level is too high, and the floating valve cannot be closed, and the water flows into the toilet from the diverter pipe, and the water flow is very small and cannot be seen carefully.
The pit distance of the toilet is the distance from the center point of the sewage pipe to the wall (with wall tiles), which is usually 300 to 400But 200, too. There are so few, Wrigley AB1218 has a pit distance, I hope it can help you.
Nowadays, there are many kinds of toilet pit spacing, etc. >>>More