-
Anonymous users2024-01-24The connection between the two lamps may be broken, and in a more lattice connection, it will become two lamps in series, and the voltage will become 110 volts, and the simple way to distinguish is to buy a 100W incandescent light bulb for 1 yuan, and replace one of them, and if the other one is back to normal, and the bulb is not very bright, that's the phenomenon I'm talking about, if the bulb and the energy-saving lamp are off, it should be the zero line is broken.
-
Anonymous users2024-01-23Switch it off. Check the wire end at the switch.
One by one, either downlights or spotlights. Downlights are astigmatism, and spotlights are spotlights (generally used for displays, or partially prominent scenes).
Some energy-saving lamps are not of good quality, if both lights are purchased in the same store, it is even more a problem with the quality of the goods, and you had better buy it in a large supermarket with trustworthy quality.
"Kitchen"with"Bathroom"It is recommended to use incandescent lamps, 40W, 60W are OK; Energy-saving lamps are not suitable for frequent switching, easy to damage, if you must use, choose W.
It seems to be 220*, which is the peak of alternating current. The voltage of 220V is the average voltage of alternating current, the maximum voltage is 220 2V, and the maximum voltage at both ends of the incandescent lamp is 220 2V
The energy-saving lamp will flash when the switch is off, and it will be more obvious at night, because there is a voltage of about 150 volts at both ends of the energy-saving lamp, and the energy-saving lamp cannot be started at this time, so it will flash occasionally. >>>More