What are the precautions for ceiling acceptance

The ceiling plays a very important decorative role, so after installation, how to accept it. What are the precautions for ceiling acceptance? Let's take a look.

1. After the keel of the light steel keel ceiling is installed, the main keel and the secondary keel can not be unstraight and distorted in the vertical and horizontal directions. If the ceiling is not straight and other quality problems are serious, it must be dismantled and reworked.

2. After the wooden keel is installed, it is necessary to check whether the supply degree of the lower surface is uneven, and there are wavy conditions in some places. If the supply of the wooden keel ceiling keel is uneven, the supply of the keel can be adjusted by using the tightness of the boom or the suspension bar bolt. If the boom is pinned and the node is loose, the split boom must be replaced.

If there is a hard bend on the street of the ceiling keel, the splint at the hard bend should be lifted off and nailed firmly after adjustment.

3. Before hanging the flat top sealing plate, the installation of the hanging point, boom and keel must be checked. Where it is found that the lifting point is loose, the boom is bent, the boom is skewed, the keel is loose, uneven, etc., the construction personnel should be urged to adjust. For example, when laying electrical pipelines, water supply and drainage pipelines, air conditioning pipelines, etc., it is necessary to wait for the installation and commissioning to meet the requirements before sealing the panel, so as to avoid the construction of the flat roof and affect the flatness of the flat roof.

After the installation of the cover panel, it should be checked whether it is flat, generally by observation and manual test method, and if necessary, the line can be pulled and the ruler can be used to check its smoothness.

Haha, the top is hung before you go to the acceptance, which is just to see the superficial things, just like a high-rise building rising from the ground, only when the foundation is solid can it be as stable as Mount Tai. Ceiling is not, only your base keel is solid and firm, and then your gypsum board surface can be done flat, firm and not deformed, you go to see, gypsum board surface cracking, deformation and painters have little to do with it, are the carpentry grassroots to cause trouble, which is called laymen to see the lively, insiders to see the doorway.

1.After the keel of the light steel keel ceiling is installed, the main keel and the secondary keel are not straight and twisted in the vertical and horizontal directions. Even the supply of the lower surface is uneven, and it is wavy in some places.

If the ceiling is not straight and other quality problems are serious, it must be dismantled and reworked. If the situation is not very serious, the supply of the keel can be adjusted by using the boom or the rib bolt, or the unstraightness caused by the loosening and desoldering of the expansion bolt or the nail can be taken to repair the nail and repair the welding.

2.After the wooden keel is installed, the supply of its lower surface is uneven, and it is wavy in some places.

If the supply of the wooden keel ceiling keel is uneven, the supply of the keel can be adjusted by using the tightness of the boom or the suspension bar bolt. If the boom is pinned and the node is loose, the split boom must be replaced. If there is a hard bend on the street of the ceiling keel, the splint at the hard bend should be lifted off and nailed firmly after adjustment.

3.After the construction of the suspended flat ceiling was completed, it was found that the surface of the suspended ceiling was undulating.

Hanging flat ceiling requires the installation of firm, not loose, smooth surface, so before hanging flat top sealing plate, must be checked on the installation of hanging point, boom, keel, where found that the hanging point is loose, the boom is bent, the boom is skewed, the keel is loose, uneven, etc., the construction personnel should be urged to adjust. For example, when laying electrical pipelines, water supply and drainage pipelines, air conditioning pipelines, etc., it is necessary to wait for the installation and commissioning to meet the requirements before sealing the panel, so as to avoid the construction of the flat roof and affect the flatness of the flat roof. After the cover panel is installed, it should be checked whether it is flat, generally by observation and manual test method, and if necessary, it can be checked by pulling wire and ruler.

1. After the keel of the light steel keel ceiling is installed, the main keel and the secondary keel can not be unstraight and distorted in the vertical and horizontal directions. If the ceiling is not straight and other quality problems are serious, it must be dismantled and reworked.

2. After the wooden keel is installed, it is necessary to check whether the supply degree of the lower surface is uneven, and there are wavy conditions in some places. If the supply of the wooden keel ceiling keel is uneven, the supply of the keel can be adjusted by using the tightness of the boom or the suspension bar bolt. If the boom is pinned and the node is loose, the split boom must be replaced.

If there is a hard bend on the street of the ceiling keel, the splint at the hard bend should be lifted off and nailed firmly after adjustment.

3. Before hanging the flat top sealing plate, the installation of the hanging point, boom and keel must be checked. Where it is found that the lifting point is loose, the boom is bent, the boom is skewed, the keel is loose, uneven, etc., the construction personnel should be urged to adjust. For example, when laying electrical pipelines, water supply and drainage pipelines, air conditioning pipelines, etc., it is necessary to wait for the installation and commissioning to meet the requirements before sealing the panel, so as to avoid the construction of the flat roof and affect the flatness of the flat roof.

After the cover panel is installed, it should be checked whether it is flat, generally by observation and manual test method, and if necessary, it can be checked by pulling wire and ruler.

A good ceiling needs to pay attention to many problems, not only need good and tight construction, but also need high-quality materials, so as to create a perfect ceiling. Next, let me introduce to you what problems should be paid attention to in the acceptance of the ceiling.

What problems should be paid attention to in the acceptance of suspended ceilings?

1: Cleanliness is not checked for acceptance.

Some people may think that the ceiling will not be dusty and does not need to be cleaned and inspected, but if the ceiling is a stacked concave and convex shape, it is easy to hide dirt and dirt.

Key points of acceptance: the ceiling is easy to hide dust, and the cleanliness of the ceiling also needs to be checked during the decoration acceptance. Generally, it is necessary to check the surface cleanliness of the ceiling, whether there is debris in the void position of the ceiling, or whether there is waste left by construction.

2: The smoothness of the aluminum gusset ceiling is good.

When inspecting the installation of aluminum gusset ceilings, some owners will be entangled in the surface smoothness of the ceiling panels, which will affect the overall aesthetics, and hope that the master will polish them. In fact, this kind of thinking is a big misunderstanding of acceptance.

Key points of acceptance: The installed ceiling surface is not uneven, relatively smooth, and does not need to be too smooth. Overly smooth surfaces will lead to an increase in spatial reflectivity, which is easy to cause light pollution in the home.

3: The smoother the ceiling, the better.

There is usually such a misunderstanding during acceptance, and the ceiling must be installed flat. Therefore, the owners are very strict in the inspection of the flatness during the acceptance, and think that the requirements for the flatness of the ceiling are the same as the requirements for the flatness of the ground and the wall, but this idea is not correct.

Acceptance points: the ceiling is stable, but it is not as smooth as possible, it is necessary to take into account the problem of the future sagging of the ceiling keel, so when inspecting, the center of the general ceiling keel should be arched from the short side 1 200, in order to meet the standard.

After reading the introduction, do you have a clear understanding of the acceptance of the ceiling?