-
Anonymous users2024-01-24Toilet cleaning + stainless steel ball brush + rubber gloves + hands + patience + carefulness = care.
-
Anonymous users2024-01-23The cement can be deducted, and the waterproof material is washed with lotion and tested.
-
Anonymous users2024-01-22With my many years of experience: no matter how much you remove it with chemicals, it will leave traces, and if there are many polluted places, it is better to remove and re-affix them. The worst-case scenario is for you, and reposting is the best option.
-
Anonymous users2024-01-21Pick slowly. The use of chemical reagents may make the water permeability of the tile uneven, resulting in the color difference of the tile.
-
Anonymous users2024-01-20The most time-saving and bottom-down method is to knock them all out.
-
Anonymous users2024-01-19How did your home be redone, the exterior wall of my bathroom was also not done well because of the waterproofing, the exterior wall was moldy, and now I haven't thought of any way to deal with it, please share it.
You can brush K11 cement-based waterproofing, and a certain treasure meat K11 will do.
You can pour some cement slurry down, and wait for two days after the cement slurry is dry, and the floor tiles will not loosen.
I don't know if he understands what he said upstairs, silicone can not be soaked in water for a long time, plus non-woven polypropylene cloth is two oil and one cloth is commonly used in the protective layer can not be used as a protective layer to prevent cracking. It is recommended to make the best water-resistant polyurethane coating on the bathroom floor for a long time, and it is difficult to hang the side wall if it is made of polyurethane cement, and the side wall does not need to be soaked in water for a long time, and it is recommended to do JS polymer cement coating with a ratio of 3:1 that can directly stick to the bricks. Hope to adopt.
The well-known waterproof coating brand has Aili, which is an imported product from the United States, which has no peculiar smell and can effectively remove the peculiar smell in the bathroom, antibacterial and mildew-proof, so that the interior can be kept bright and white for a long time. Because there are many water stains in the bathroom, and the air is not well dredged and humid, you can make a mortar waterproofing agent protective layer to increase the strength of the wall and improve the puncture resistance.
Kitchen and bathroom waterproofing is best constructed with composite waterproof coating, and the thickness needs to reach the coating film. Composite waterproof coating is a coating with water as the dispersion medium, which can be applied on the surface of a dry or wet (no open water) base layer. Because it has the dual functions of volatile curing and reaction curing, the film formation speed is fast and the wear resistance of the coating film is good; In addition, it has good adhesion to the base layer, high tensile strength, large elongation at break, and strong adaptability to the expansion or cracking deformation of the base layer; The paint is non-toxic, tasteless, safe and simple to construct.