The walls of the home are leaking, especially in the living room and bathroom, but all the wires are

Updated on Living room 2024-07-26
1 answers
  1. Anonymous users2024-01-24

    Section-by-paragraph elimination.

    First disconnect all the loads that can be disconnected first, and disconnect them first if they can be dialed out.

    Then check the line section by section, because the wiring must be multi-way, such as one switch is laid to another.

    It is to connect a part of the line to go in first, see if there is any leakage, and then connect until it is found.

    After finding out which section, the focus is not to see if it is caused by the load, check whether the line has been cut through the wall and other skins, and whether it has been immersed in water.

    Is there a joint, whether there is a rat bite, whether there is a hole in the decoration and the line is broken, etc.

Related questions
When the rainy season returns, the home is very damp, especially the bathroom, what to do
2 answers2024-07-26

The exhaust fan is the basic equipment of the bathroom, and the exhaust fan can be turned on frequently, in addition to discharging the moisture in time, it can also discharge the filth of the bathroom, which is conducive to physical health. If you do not have an exhaust fan, you should close the door when you leave the bathroom after taking a shower and allow the moisture to condense before entering to dry or blow dry with an electric fan. There is an integral shower room, so be sure to close the door when showering. >>>More

Electricity leakage from the bathroom wall
1 answers2024-07-26

It was when it was decorated, and the wires buried inside leaked. >>>More

The bathroom riser at home smells back, especially when someone is flushing upstairs
1 answers2024-07-26

Then there is a leak in the sewer of your house, which means that there is a leak in the maintenance port.

The lighting at home is not particularly good, especially the living room decoration paint, I don't
2 answers2024-07-26

If the lighting is not good, you can design some mirrors in the house or if the property allows, you can open a window, the roof is painted white without personality, you can also use beige, and children can use green. It is more individualistic to brush separately.

How do you know that your bathroom, especially the floor drain and toilet drain pipes are installed?
6 answers2024-07-26

To determine whether there is a sink bend in all drainage and sewage pipes, you can see whether there is water in all the sewer and sewage pipes. First of all, because of the particularity of the toilet, it basically comes with a submersible bend, if the sewage pipe below is still a submersible bend, it will affect the fluency of the sewage discharge, and it is easy to cause blockage, so it is generally the toilet that has its own bend, and if you open the toilet lid directly, you can see that there will be a pool of water in the toilet, which is the existence of a submersible bend, which has the function of separating the exhaust gas of the sewage pipe from the flowback; If you have a floor drain, you can open the face cover of the floor drain and use a flashlight to irradiate the bottom of the floor drain mouth, if you find that there is also a pool of water, it is a sinking bend, and vice versa. >>>More