How to disassemble and assemble the sliding door of the kitchen and living balcony

Updated on Kitchen 2024-07-22
1 answers
  1. Anonymous users2024-01-24

    First look at whether there is a plastic block in the door frame above the door, which is a plastic block protruding.

    Screw it on top of the door frame and remove this first. Usually there is a piece above each door.

    After dismantling, grasp both sides of the door frame with both hands and hold the whole door up so that the pulleys below are off the track. Then he pulled the bottom of the door out, and came out diagonally.

    On the contrary, first put the upper face at the upper frame, then push it up to the head, insert it, and then put it down after the bottom enters the track.

    Finally, lock the stop again.

Related questions
2 answers2024-07-22

The door opens a little and you can see the shaft above the door. There is a screw on the shaft, and the mouth is screwed with a word change cone downward, and two people are found to hold the door well. Take the cone to loosen the screws until the door is disengaged from the upper shaft, and then you can put the door back in place. >>>More

1 answers2024-07-22

If you need to dry your clothes on the balcony, it's better to pretend to be one that won't look so messy.

1 answers2024-07-22

This is a normal phenomenon - the indoor partition is the indoor net floor height, there is no balcony door opening, and it is normal to be dozens of centimeters higher!

1 answers2024-07-22

At present, there are basically two types of plate and glass on the market. >>>More

1 answers2024-07-22

A sliding door must be added! There will be obvious sound insulation, heat preservation - in the cold and summer season, the room temperature is several degrees worse!