If you want to insert a drum washing machine under the panel in the whole kitchen, what is the solut

Now that I've seen your picture, I'll give you a brief stroke and explain it to you.

I took the 2.5 meters wide wall of your home as the kitchen countertop, designed a reasonable operation pattern, of course, the placement can also be replaced, the washing basin you disinfection cabinet stove;

The opposite side can be put a washing machine, this countertop can be made a little higher, because the main operation part of the kitchen is already on the opposite side, this table just plays a beautiful and coordinated role and storage, if you feel that the kitchen is awkward on one side of the high and low, you can also make this table into a small ladder, but play a beautiful personality effect.

The reason why the washing machine is on the opposite side is because your kitchen is small, remove the necessary kitchen utensils in the kitchen, there is no place to put the washing machine, the most reasonable layout of the kitchen is to put it on the countertop after washing the dishes, let it be put into the pot, and the washing basin and the disinfection cabinet are connected just after washing the dishes and put them into the disinfection cabinet.

Just a reference, I hope it can help you, your kitchen is small but you have to dare to try to innovate and arrange it to look just as good, you don't have to put everything together.

The countertop 800 is too low, and the 850 at home is too low, especially the sink, and I feel back pain after a long time. The gas stove is under the counter will not be inconvenient. The lowest washing machine is 840, and adding 20-30 to the countertop is 860-870, which should also be okay.

The countertops are all flat, which looks good and is easy to use.

I Q904230421 last time I used oupai88720380's account back to the big was blocked.,This time I changed my account.,But I can't send a picture.,I've designed your kitchen,

THE 850MM HIGH DRUM WASHING MACHINE CAN BE TURNED INTO 800MM HIGH, YOU CAN REMOVE THE TOP COVER OF THE DRUM WASHING MACHINE WITHOUT AFFECTING THE NORMAL OPERATION OF THE WASHING MACHINE, NOR THE OVERALL APPEARANCE OF THE BUILT-IN CABINETS! IT CAN BE REDUCED BY AT LEAST 50MM. There is also a way to lower the height of the washing machine, which lowers the four feet again.

With this adjustment, the washing machine can be recessed into the cabinet height.

According to your description, it is more reasonable to make it a stepped shape, and the main function of the cabinet should not be abandoned because of the washing machine, which will increase the cost and labor. The main consideration of the stove and washing basin is the placement of things on the countertop, and the length of the washing basin can only be compressed, and the single basin is selected.

If it is said that the washing machine is a helpless move in the kitchen, I think it is not a room type map to discuss it.

The washing machine is placed in the kitchen, and drainage is also a problem, so it is recommended to do waterproofing.

You can make a cabinet above the washing machine, and the countertop can be 800

I don't know if you like that!