What to do if the toilet is blocked by a plastic bottle cap

Use conventional methods to try whether it can be dredged, if not, it is a big project, find a plumber to remove the toilet, dredge it and then reinstall it.

Conventional methods: 1. Pier cloth method: mopping the pier cloth. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

3. Buy a manual dredger, that is, the toilet bowl, the lower end of the rubber is attached to the toilet mouth, press down hard, and repeat several times until it is dredged.

The easiest way is to add the appropriate amount of water to the toilet bowl and press the leather bowl at the toilet mouth with the help of a certain force of water. You can also buy some caustic soda to boil water, melt the caustic soda and pour it into the toilet, after chemical reaction, the dirt in the toilet bowl will be corroded, wait for ten minutes and then rinse it with clean water. You can also use a good quality plastic water pipe, connect the tap water at one end and plug it into the toilet mouth at the other end, and then block the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to dredge the pipe.

The toilet is clogged, and a slender iron wire can be unblocked. It is necessary to use a pair of clamps. If that doesn't work, you can go to some hardware stores and buy tools that you can use to clean your toilet.

By increasing the pressure, the purpose of clogging the toilet bowl can be removed. If the squat toilet is clogged with something that is more likely to decompose, you can pour some hot water into the toilet, soften the objects, and wait a while to see if the objects are dispersed by air bubbles. A large bucket of water flushes down, clears the toilet bowl and repairs the blockage.

Flush the toilet bowl with a cloth and water.

If the squat toilet is blocked by some rigid object, a long plastic water pipe is required, one is connected to the toilet and one is connected to the water pipe, the toilet is blocked with a cloth block, and then the faucet is opened to release the moisture, as well as to apply pressure. Clean the pipes with water pressure.

Suction the toilet bowl with a toilet disc.

Toilet suction is a commonly used tool in toilets. It is available in many homes. It is dedicated to toilets, and squat toilets can also be used. Before using the toilet bowl for suction, first put some water into the toilet bowl, then press the toilet bowl suction nozzle and press it several times to make the toilet bowl unobstructed.

Unclog the toilet bowl with a manual unclogger.

You can use a professional manual unclogger to unclog your daddy's toilet. This plunger is similar to a professional toilet tool, but requires a manual one. Place the part without a head into the toilet drain opening and start shaking until it is no longer possible.

You need to add water while shaking. For all kinds of toilet obstruction and sink obstruction, this appliance is actually very effective. And the practicality is relatively simple, you can also press down like pumping, and then dredge the toilet by pumping.

Dun cloth method: use your mopping cloth to mop the floor. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

Find a longer stretch of plastic water pipe, connect one end to the tap water, plug the other end into the toilet mouth, then plug the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to unclog the pipe.

Go to a 2 yuan store or grocery store to buy a manual dredge (something that looks like a spring), and dredge it yourself, and a dredge is a few yuan.

What to do if the toilet at home is clogged, you can solve it with a plastic bottle and PVC pipe!

Pour some hot water into it to soften and then wear gloves to take it, if it is too deep to reach, you can only pour hot water until the bottle shrinks and flows down the pipe.

Only turn the toilet on its side and pull out the bottle cap. Then put the toilet in the right place and plaster the surrounding area with cement or glass glue.

Pour in hot water and then use a simple sewer unclogger to boil water for free 10 yuan for a dredging device.

Then you have to dredge it up and find special tools.

Plaster the area with cement or glass glue.

Dear, according to your question mine is as follows.

Use conventional methods to try whether it can be dredged, if not, it is a big project, find a plumber to remove the toilet, dredge it and then reinstall it.

Conventional methods: 1. Pier cloth method: mopping the pier cloth.

First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth. Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

3. Buy a manual dredger, that is, the toilet bowl, the lower end of the rubber is attached to the toilet mouth, press down hard, and repeat several times until it is dredged.

That's my answer, do you have any questions? Dear, if you don't, remember to pay attention to me. Next time you have a question, come directly to me for consultation, oh dear! Give me a thumbs up! Thank you. I wish you good health and all the best

Ask a professional sewer worker to get it.

If you don't do it yourself, if it's dirty, ask a professional sewer worker to do it.

Find a professional dredge master, they will have a way.

Hurry up and find someone who comes to unclog the pipes.

Call a professional dredging master to help, where are you?

Answer: If a plastic cover falls off the toilet, you can dredge it with a leather liaison, because the plastic cover is relatively light, you only need to poke it down with a leather lid, and the plastic cover can be cleaned out; Or use a pipe unclogger, break the plastic lid, and press the toilet flush button to flush the plastic lid away.

What to do if the toilet smells strong.

1. Keep the toilet clean and tidy.

Keep your toilet clean and tidy and wash it regularly and thoroughly, which will effectively remove toilet odors.

2. Biological enzymes.

To get rid of the smell of the toilet, you can use biological enzymes, which are used to clean the toilet once a week to keep the toilet clean and tidy, so that the odor can disappear.

The bamboo charcoal bag has an adsorption effect, so when placed in the toilet, it can effectively absorb the odor in the toilet and make the toilet cleaner.

Question: What should I do if the plastic cover is flushed down, the toilet is blocked, and the master is asked to dredge it twice.

First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth. Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

3. Go to a 2 yuan store or grocery store to buy a manual dredge (something that looks like a spring), and dredge it yourself, and a dredge is a few yuan.

The toilet is clogged by the bottle cap, one cleans out the water in the toilet bowl and uses a vacuum cleaner to try to see if it can be sucked out, and in one can only remove the toilet bowl and dredge it upside down, and then install it from scratch, there is no other good way.

Buy some caustic soda, boil water to melt the caustic soda, pour it into the toilet, after chemical reaction, the dirt in the toilet will be corroded, wait for ten minutes, and then rinse it with clean water.

The toilet bowl is generally glued to the floor with glass glue, and the small blade can be cut with a slight touch, and then the entire toilet bowl can be lifted, and the plastic bottle cap can be removed by hand.

What to do if the toilet is blocked by a plastic bottle cap, it is impossible to find a way to take out the plastic bottle cap and flush it down.

You can only take out the cap, otherwise it will be blocked.

You can find someone from a housekeeping company to negotiate a good price before dredging.