What to do if the solid wood door is higher than the ground

Updated on Solid wood 2024-07-27
2 answers
  1. Anonymous users2024-01-24

    Based on the experience of Obolon wooden door company: what you are talking about is that the ground is higher than the bottom of the wooden door (under normal circumstances, the bottom of the solid wood door itself must be higher than the ground, otherwise the door can not be closed), there are only two ways to solve this problem: one is to cut off the extra part at the bottom of the wooden door; The second is to dismantle the wooden door and door cover, lift the wooden door up and reinstall it (sometimes the upper part of the door opening needs to be expanded).

  2. Anonymous users2024-01-23

    Widen the opening or cut the door leaf and door casing.

Related questions
4 answers2024-07-27

Once the wooden door expands by moisture, it will be deformed, and the general deformation is likely to lead to the problem that the door cannot be closed, which is very worrying. In fact, the main reasons for the deformation of the wooden door are as follows: 1. Damp, the high moisture content of the wood is also a major reason for the deformation of the wooden door. >>>More

2 answers2024-07-27

Brush tung oil and batch putty at the cracks.

1 answers2024-07-27

Due to the different construction practices, different effects will be produced. However, it is not the law that explicitly states that the floor of a room with water must be lower than that of other rooms. In most cases, the floor of the bathroom and kitchen is slightly lower than that of the other rooms, so as to prevent water from backing up into the other rooms in the presence of water. >>>More

1 answers2024-07-27

Wooden doors can be selected according to their own decoration style, so most families will choose wooden doors to decorate their loving home. However, after a long time, the situation of the wooden door peeling paint will also appear, which can not help but worry the owners. 1. Solution: >>>More

6 answers2024-07-27

The first case: if the air leakage gap is left over from installation, it is best to clean the gap between the window frame and the door cover and the wall, plug it in with styrofoam, then fill the gap with cement and sand, and finally repair it. >>>More