Please advise which is better, flush or siphon

There is a complete pipe in the siphon toilet with an inverted "S" in the shape of a side-to-side shape, and the slope of the pool wall is gentle, and the noise problem has been improved; It has the characteristics of strong sewage discharge capacity and large clean surface, so the vast majority of toilets, especially the conjoined ones, are siphon type. The biggest advantage is that the flushing noise is low, which is called silence. It is easy to flush off dirt that adheres to the surface of the toilet.

The disadvantage is that the water storage area at the bottom of the pond increases.

The flush toilet uses a large thrust formed by the compressed air, with fast flushing speed, large punch, strong sewage discharge, fast speed, less water use, and no leakage. Because the flush type uses the instantaneous and powerful kinetic energy of the water flow, the sound of hitting the pipe wall is relatively loud.

No matter what kind of toilet, the first thing to depend on is the pipe that goes down, if the pipe has a U-shaped trap, choose the straight flush type, if there is no trap, it is recommended to use the siphon type.

Punch-down type (straight punch type).

The flushing is done directly by using the impulse generated by the drop in the water. The drainage diameter is large and not easy to block. Its impulse is average, the cleanliness of the inner wall is average, the cleanliness of the water storage is also average, the water storage is less needed, and the noise is slightly larger.

There are three types of siphon types:

1. Ordinary siphon type.

This kind of structural impulse is average, the cleanliness of the inner wall is average, the water is still polluted, and there is a slight noise. In order to achieve a perfect siphon, it is necessary to ensure sufficient water storage, so most of them have a water replenishment device, which is more prone to clogging.

2. Jet siphon type.

There is a spray hole at the bottom, and water is sprayed out of the spray hole when flushing, which first flushes away the excrement, and then quickly siphons to completely replace the stored water. Its impulse effect is very good, the inner wall is generally clean, the water storage is very clean, and there is a slight noise.

3. Vortex siphon type:

At the bottom, there is an outlet hole on the drain side, and when the water is flushed, a rotating vortex is generated. On the one hand, the inner wall is thoroughly washed, and at the same time, the vortex strengthens the siphon effect. The impulse effect is good, the inner wall is quite clean, and the mute effect is good. However, because of the small diameter of the drainage, it is more likely to be blocked.

How should you choose a toilet? What is the difference between flush type and siphon type? Comparison of their advantages and disadvantages.

Answer: The principle of siphon flushing is to use the principle of siphon, after the drainage pipe is filled with water, a certain water level difference will be formed, and when the toilet is flushed, the sewage pipe can produce suction to drain away the dirt. Flush toilets, on the other hand, are relatively simple and crude, and the air compressed by the rush of the water flow forms a thrust to expel the dirt.

In contrast, the siphon toilet is easier to flush away the dirt attached to the surface of the toilet, which is more conducive to the cleaning of the toilet itself, and the flushing effect is more thorough. The siphon toilet comes with a water seal effect and has an anti-odor function, so it is recommended that you choose a siphon toilet.

Flushing toilet is to flush the toilet directly with water, it is very easy to install, the cleanliness of flushing is particularly high, and it will not often block the toilet, but the sound of flushing is particularly loud, which will affect the difference, and the siphon toilet has a U-shaped internal structure, so it does not need to be cleaned often, but it is a waste of water.