-
I am selling toilets, I suggest you go to your local building materials market to find a master to dismantle the toilet, and then take out the rubbing stones, and then install them, this is the most money-saving and fastest way, there is no chemical raw material in domestic technology, and the rubbing stones can be decomposed.
-
Use a wallpaper knife to cut the adhesion between the toilet bowl and the floor, and then you can take it out, usually in the U-shaped area.
-
Hehe, buddy's rubbing stones can melt, so do you think the toilet can still be broken? Or find a pipe to dredge it, in fact, the treatment method is very simple, the toilet is glued to the ground, that is to say, as long as the glue is disposed of, the contents can be taken out, and it can be used after being taken out.
-
Do you mean pour sulfuric acid?
-
Remove the toilet bowl so that it is facing up, introduce dish soap through the hole in the bottom, and gently shake it out, or buy a new one.
-
It is difficult to remove the toilet bowl and reinstall it, and the toilet drain is S-curved, so your hand may not be able to get in.
<> himself to see if he has fallen to that position, can he still sell the acres and take the loss of Peisen out.
Put on plastic gloves first, try to reach in and fish them out to see if you can take them out. If you don't get it, you can only find a professional staff to deal with it, after all, we don't have those tools.
If you want to get out of the toilet bowl of this bouncing ball, you only need to slam this bouncy ball.
Bring rubber gloves and take them out, or ask the repair company to [make a bit of a fuss].
1. ALL TOILET PIPES ARE GENERALLY DISCHARGED FROM TOP TO BOTTOM BY 110MM PVC, IF THERE IS NO TOO LONG HORIZONTAL PIPE AT THE BOTTOM, AS LONG AS YOU FIND THE SEWAGE WELL CONNECTED TO THE RISER ALONG THE DRAINAGE PIPE, THE GOLD IS HEAVIER, AND IT WILL GENERALLY SINK AT THE BOTTOM OF THE WELL MOUTH; Good luck!