-
Anonymous users2024-01-24It should be caused by capacitive discharge! The reason should be that the power supply does not match the light! Connect a resistor in parallel at the output! Try matching a resistor greater than 5 ohms!
-
Anonymous users2024-01-23The output of the power supply is discharged with resistance, and many of them are solved in this way.
-
Anonymous users2024-01-22There's no way to fix this, and if you don't let it flash, you can't start it.
This means that your light switch is not connected to the live wire, but only the neutral wire. Since the LED is dimly bright, the current used can be very small. Therefore, when the live wire is not disconnected, the induced electricity can also make it faintly bright. >>>More
Listening to your description, it seems that it is equipped with a light control switch, which does not light up when the light is strong, and automatically lights up when the environment is dark.
At least 40 watts to become, because it is LED, it is recommended to install more than 3 and 6 below, depending on your own plans. >>>More
It is recommended to buy a fan lamp, if you have a chandelier now, there is no place to install a fan. >>>More
Hello, it may be a problem with the crossing line.
If this situation occurs many times, it is possible that the LED light is the wire that passes through the wall socket, and it is possible that the contact of this place is not very good, when the socket is inserted, the metal inside plays a role in connecting, so that the wire that is not well connected is re-conducted, so it changes from dark to bright. >>>More