-
This situation is not normal, the conjoined toilet or the accessories of the water tank have problems, if the ground of the split toilet is not water, it is basically a problem with the accessories in the water tank, it is recommended to find another professional person (such as sanitary ware shop, sewer hardware store in the professional installer) repair and repair, the problem to him explained, should be able to solve.
-
The inlet buoy stop valve is broken! Let's change it!
Hello, this is one of the most common failures of the inlet valve, called the inlet valve more than water. When the water level reaches the highest level, it flows into the toilet from the overflow pipe of the drain valve, which wastes water. >>>More
The toilet inlet valve keeps getting water because the float or float of the inlet valve is jammed. >>>More
Use a handle to rotate a few buckles from an angle in small increments, and then remove them by hand.
If the newly installed toilet leaks abnormally, no matter what the reason is, it should be within the scope of the three guarantees, and the merchant should be responsible for repairing and replacing it to normal use, and compensate for part of the loss. However, as a user, you should find out as soon as possible and notify the merchant of the repair in time, and you should also bear a part of the loss. 300 square meters of water and thousands of dollars, negotiate with the merchant, and it is not troublesome enough to prosecute. >>>More
The tank float is not adjusted.