The floor of the living room is pasted with 800800 floor tiles, do you need to level the ground firs

First, the living room floor regardless of the size of the floor tiles, it is best to level the ground, otherwise in the future use of the process may appear due to uneven ground caused by the floor tiles bulging, which will lead to damage or water seepage of the floor tiles, the laying of floor tiles must be in accordance with the specifications of construction.

Second, the construction method of laying floor tiles:

1. Ground treatment: Before construction, the construction surface should be cleaned up, and then the wall should be wet with clean water and the bottom layer of 1:3 cement mortar should be wiped.

2. The tile should be fully soaked in water before paving to ensure that the paving is firm.

3. When paving the ground, it is best to draw two vertical steps from each other at a certain height on the wall or ground after smoothing and drawing a line, and use a horizontal ruler to compare horizontal.

4. Take an appropriate amount of sticky grout in the corner of the main wall, quasi-flat to about 1CM thick, that is, take the first brick and spread it on the mortar, gently knock it with a wooden hammer until it sticks firmly and ensure that the brick surface and edge are in an equal or vertical position with the drawn line, and the rest of the bricks are paved in turn until completed; After the mortar dries slightly, use a wooden wedge or fine sand to place it on the surface of the brick to clean the remaining slurry and surface.

5. After 12 hours of paving, the brick surface should be knocked on for inspection, if it is found that there is a free knocking sound should be re-laid, and all brick paving products can be walked and scrubbed after 24 hours.

Third, the procedure of tile laying: base plastering - combined layer plastering - elastic line grid - brick - hook joint - cleaning.

1. Base plastering: This process should strictly control the verticality, and the hairier the surface, the better.

2. Combination layer plastering: After one day of plastering at the bottom layer, plaster with 1: cement mortar.

4. Clean up.

Dry paving is a side of the shop to find the flat, no need to level in advance, the floor tiles belong to the full magnetic polished bricks do not need to soak in water in advance, you antique bricks need to be soaked.

No need to pave the floor tiles themselves to pad cement mortar does not need additional leveling polished tiles do not need to be soaked in water, glazed tiles need to be soaked in water.

Hello, I'm a renovation bricklayer.

Generally, 800X800 floor tiles are dry paving, this kind of construction does not need to be leveled, whether it is a drop of 20 cm or a height of 4 cm, it doesn't matter, as long as the humidity of the bottom slurry is just right, don't listen to those who don't understand a little bit and come out to talk nonsense.

Bricks above the grade of all-porcelain do not need to be soaked in water, and glazed bricks need to be soaked in water.

It is the master who lays the bricks while leveling, and there is no need for leveling, and it is all porcelain without soaking in water.

Floor tiles must be leveled, otherwise you will be disappointed in terms of quality and beauty.

If the 800*800 floor tiles are paved, they are all dry pastes, so there is no need to level them first.

Yes, some of your wall tiles and baseboards need to be soaked in water before pasting.

The living room is dry, no leveling, no soaking.