A few essentials of solid wood floor construction

There are basically two kinds of installation of wooden flooring: one is to use floor glue directly on the indoor cement floor, which is suitable for flat ground and small parquet flooring next to the cherry blossoms; The second is to erect a wooden keel on the original ground and nail the floor strip to the wooden keel, which is suitable for long wooden floors. The third type is the unpainted assembled wooden floor plate, which needs to be smoothed with a sander, sandpapered, putty, and finally painted after installation.

The floor must be straight, the tongue and groove must be smooth and oakless, the groove is free to go back and forth, there is no unevenness between the floors, no cracks, the color of the floor must be consistent, there are no obvious scars, if it is a painted floor, it must be good wear resistance, strong hardness, bright and soft, smooth and smooth. The inherent disadvantages of wood are that it swells and shrinks wetly, changes in size, and is easy to scratch, mold, and moth-eaten.

It is recommended that you take a look at the solid wood flooring of the good brand. It is guaranteed in terms of quality and after-sales.

1.The solid floor should be installed first, and then the wooden floor should be paved.

2.The installation method of the keel: the embedded parts should be made on the ground first, in order to fix the wooden keel, the embedded parts are bolts and lead wires, and the spacing of the embedded parts is 800 mm, and the hole is drilled from the ground.

3.Installation method of wood flooring: solid wood flooring should have a base panel, and the base panel should use a large core board.

4.After the floor paving is completed, the surface is planed and planed with a planer, and the floor surface is cleaned and then painted with floor paint, polished and waxed.

5.After all wooden floors are transported to the construction and installation site, they should be unpacked and stored indoors for more than a week, so that the wooden floors can be used only after they are suitable for the temperature and humidity of the room.

6.Before the installation of wood flooring, it should be selected to eliminate unqualified products with obvious quality defects. If the color and pattern are consistent in the same room, there is a slight lack of quality but does not affect the use, it can be placed at the bottom of the bed, cabinet and other furniture, and the thickness of the board in the same room must be consistent.

When purchasing, it should be purchased at one time according to the loss of the actual pavement area increased by 10%.

7.The keel of the paved wooden floor should be made of pine, fir and other trees that are not easy to deform, and the back of the wooden keel and baseboard should be treated with anti-corrosion.

8.Paving solid wood floors should avoid construction under heavy rain, rainy and other climatic conditions. It is best to keep the indoor temperature and humidity stable during construction.

9.The wooden floor in the same room should be paved at one time, so it is necessary to prepare sufficient auxiliary materials, and to protect the finished product in time to prevent oil collapse, juice and other pollution surfaces. The glue extruded during installation should be wiped off in time.

Precautions. 1.The paste-type paving of the wooden floor should ensure that the cement mortar floor is not sandy and cracked, and the base must be cleaned.

2.The base layer is uneven, and the wooden floor should be paved after the cement mortar is leveled. The moisture content of the base layer is not more than 15%.

3.When gluing wooden floors, it should be thin and even. The height difference between the two adjacent wooden floors is not more than 1 mm.

There are basically two kinds of installation of wooden flooring: one is to use floor glue directly attached to the indoor cement floor, which is suitable for flat ground and small strip parquet flooring; The second is to erect a wooden keel on the original ground and nail the floor strip to the wooden keel, which is suitable for long wooden floors. The third type is the unpainted assembled wooden floor plate, which needs to be smoothed with a sander, sandpapered, putty, and finally painted after installation.

The floor must be straight, the tongue and groove must be smooth and flat, the groove goes back and forth freely, there is no unevenness between the floors, no cracks, the color of the floor must be consistent, there are no obvious scars, if it is a painted floor, it must have good wear resistance, strong hardness, soft brightness, smooth and smooth. The inherent disadvantages of wood are that it swells and shrinks wetly, changes in size, and is easy to scratch, mold, and moth-eaten.

It is recommended that you take a look at the solid wood flooring of the good brand. It is guaranteed in terms of quality and after-sales.

1. Ground flatness;

2. Test row before paving;

3. Dryness of the base layer;

4. The elevation and elastic line of the baseboard;

5. The construction should be carried out after the civil works are all completed and the wall putty is completed;

6. Other construction should be protected before completion.