The toilet sewer pipe is moldy

Updated on Bathroom 2024-07-06
1 answers
  1. Anonymous users2024-01-24

    1. Tile anti-seepage and mildew prevention measures.

    When decorating the bathroom, the walls are mostly paved with tiles, and in order to keep them clean and bright, you can use a multi-purpose stain remover to clean them. As for the gaps in the tiles, you can first use a toothbrush dipped in a little detergent to remove the scale, and then use a brush brush to brush a waterproof agent in the gaps. This prevents not only seepage, but also mold growth.

    2. Wipe the glass, smooth mirror surface and windows.

    Because the mirror and glass will be watermarked and blurred due to long-term close contact with water. You can use a spray glass cleaner to spray a large X-shape on a whole piece of glass, then fold the wrung out rag, wipe it in one direction, and wait until the glass is dry, and then wipe it again with a dry cloth. It can also be wiped with old newspapers, and the ink of the paper can make the glass shine as bright as ever, and it can also wipe away stubborn dirt.

    3. Make a whitening mask for the toilet.

    The toilet is an indispensable building material product in the decoration of the bathroom, and the toilet is also the place where mold is most likely to grow. Put an appropriate amount of water in the toilet bowl first, clean it with a toilet brush, then pour about 5-10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it, if the dirt is heavier, you can pour a little detergent to soak it and then scrub it until it is clean, and then rinse it with water.

    4. Clean sanitary ware ceramics are as bright as new.

    With white vinegar and lemon peel. Scrub the dirt on the surface of the sanitary ware first, and then wipe the surface of the sanitary ware with a soft cloth dipped in a little white vinegar or wipe it with lemon peel.

    5. The faucet is perfectly clean.

    Faucets and showers are often stained with a variety of shower gels, shampoos, dish soaps, etc., which can make the chrome surface of faucets dull. You can spray a mild detergent on a soft cloth and gently wipe the faucet once a week. Never "torture" the faucet with acidic or abrasive detergents or wire brushes.

    The shower will be used for a long time and the scale will clog the water outlet of the shower, like this can be disassembled and soaked in weak acid water, which can be replaced with vinegar, and it can be dredged in about 30 minutes.

    6. Refreshing bathroom.

    In fact, the way to make the bathroom have a fragrant smell and fresh air, and there is also a way to breed plants. You can raise some shade-loving plants. You can also buy an oxygen bar brick, an oxygen bar brick similar to a mural can play a role in refreshing the air like plants, and do not need to be cared for, and can be used as a decoration in the bathroom decoration, so that the bathroom becomes an "oxygen bar".

Related questions
1 answers2024-07-06

Abstract If the downstairs bathroom is your own home, it doesn't matter, but if it's someone else's, it's best not to do it, because it will affect others, but you can also negotiate with him and give them some compensation to see if they agree. >>>More

6 answers2024-07-06

It seems impossible not to destroy the floor tiles

Just pry open the floor drain and the floor tiles around the sewer pipes and do it all over again >>>More

2 answers2024-07-06

The reason for the problem is the cracking of the waterproof layer, the place where the waterproof cracking, according to your description, is the position of the connection between the waterproof layer and the drain sewer pipe, caused by cracking, after the tiles around the floor drain are smashed, the leakage plugging spirit is used again to paint the waterproof layer and the drain sewer pipe wall position.

6 answers2024-07-06

Bend a small hook on both sides of two wires and hang it in the pipe mouth in an inner cross concave shape, (I think there should be a little gap between the pipe mouth and the paved tiles, it should be able to hang.) Even if there is no gap, then you can knock a small nail in the eye. And then stuff a little ball of plastic bag or something, and you can smooth it out with a little bit of plaster. >>>More

1 answers2024-07-06

It is the responsibility of the contractor, but the agreement between the developer and the contractor needs to be reviewed.