-
Anonymous users2024-01-24The cause of mold is dampness. It looks dry on the outside and damp on the inside. The waterproof of the bathroom is generally only 30-80 cm high, and the moisture accumulates and penetrates into the bricks. Wallpaper also hinders ventilation and drying.
-
Anonymous users2024-01-23The walls in the bathroom are not waterproofed, right? If you can't fix it, you still think that the drum didn't handle it well when you grabbed the wall skin? Look at your kind of big problem, you should redo the waterproofing of the bathroom, it is best to let the workers make a piece of the wall when you do it, and the floor drain and near the door should focus on it.
There should be a faucet on the opposite interior wall The wire mouth of the faucet is in the tile The wire mouth is not installed well A small amount of water seepage slowly penetrates into the wall after a long time The waterproofing of the bathroom will not achieve the height of the faucet It may not have anything to do with waterproofing.
1. Water pipe leakage: When laying water pipes in the bathroom, the water pipe interface is not tightly connected, and the water pipe leakage will also lead to water seepage on the exterior wall during use; 2. The waterproof layer is not done: secondly, the waterproof layer is not done well, which will also lead to water seepage on the exterior wall; 3. Improper dry paving of Xinxiang tiles: >>>More
If you haven't renovated yet, then don't worry, see whose house is leaking when it comes to the bathroom. Joked. It is recommended to close the main valve and drain the water, see if the water seepage, it is best to test the pressure to accurately judge, and it is the same for each family.
Hello: Transforming the floor drain can prevent odor and drain the floor drain with silicone. Just look at the picture and you'll understand.
Replace the floor drain water seal, the floor drain water seal water is too little.