-
Anonymous users2024-01-24This phenomenon is relatively rare, and I guess it may be that the elbow of the barrel is broken, and the elbow no longer exists, so it cannot store water. If you pour water into the toilet bowl and still can't hold water (a small amount of water to prevent the smell from overflowing), then you are almost certain that there is a problem with the elbow.
If there is no problem at the elbow, then it must be that the water supply pipe has not worked, and the water supply pipe is in the water tank, which is used to replenish the water at the elbow after each flush. You can see when you open the tank.
-
Anonymous users2024-01-23It is the aging of the drain valve, or there is something stuck to interfere with, the sealing under the sealing pad, or the aging and leakage of the sealing rubber ring, etc., can lead to water leakage, you say that the leakage is dry, it should be the leakage of the sealing ring You come to me, I can help you.
-
Anonymous users2024-01-22The toilet has a broken trap and the water flows directly to the sewer pipe, so it can't hold water.
You put the toilet up and try to put some silicone on the bad side.
That is, there is a problem with the plug of the drain outlet of the water tank, and it should be ...... that the flush port cannot be re-blocked by its own weight >>>More
The key is that the rubber pad (may be an engineering plastic cushion) at the water inlet can not suppress the water flow of the inlet, and a rubber pad of the same size as the water inlet can be cut and glued to the original rubber pad (may be an engineering plastic cushion) with universal tape, so as to increase the pressure of pressing the water flow of the inlet water, and the float ball will reach a certain height with the water level, and the rubber pad (may be an engineering plastic cushion) will be added by the lever to easily block the water flow of the inlet water. There is also a step to tighten the cushion by turning the screws behind the engineering plastic cushion to adjust the tightness of the cushion in a clockwise direction a few times to tighten the cushion. In this way, the problem of water leakage is solved.
I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More
You need to make it clear whether it is a leak at the inlet or outlet. If it is a leak at the water inlet, just replace the water inlet pipe, generally the rubber pad is aging, and just changing the gasket can also solve the problem. If it is a leak at the outlet, it means that there is water flowing down the drain from the toilet all the time, then it is that the drain valve in the toilet tank is broken or the rubber mat is stuck with debris. >>>More
Here's how to fix a leaky flush toilet: Materials: Slotted taper, rubber sheet, double-sided tape. >>>More