The living room has an infinite router installed, but I can t receive it in my room, and I can t eve

Updated on Living room 2024-07-05
8 answers
  1. Anonymous users2024-01-24

    Unlimited routers depend on how many megabytes of broadband you have! The higher the megabyte, the better! If it has nothing to do with this!

    It might be better to buy a wireless router with multiple antennas! It has a lot to do with the poor reception signal of the computer network card, so try to change to a powerful wireless network card! There are also a few computers that are very slow with a single broadband!

    Each computer has a share of broadband megabytes, which is slow! Yes, go buy a wireless router and install it in your bedroom, and connect the WAN port to the cable in the bedroom. The WAN port IP is configured for your bedroom computer, and the LAN port IP can be set at will, not the same as the WAN port.

    The desktop computer in the bedroom is then connected to the LAN port on the newly purchased router. You can surf the internet in your room.

  2. Anonymous users2024-01-23

    It seems that your house is good, and there are steel bars in the walls, which will affect the routing signal. In addition, what kind of routing do you use, now the dual antenna 300M routing signal is very strong, and it is not possible to change the triple antenna.

    There is no longer a plan to use the electric cat. The customer routes the outgoing line, plugs it into the power modem, and the power modem connects to the wall power socket. Plug in the inner house wall and connect the power cat cable to the computer.

    There are also two routes, put it in the place where you can receive the routing signal in the living room, and you can also receive the second routing signal. They make a bridge.

    Three scenarios:1Buy a high-power router. 2.Power modem connection. 3.Dual-route bridging. 4.No thanks, I wish you the best of luck on the Internet.

  3. Anonymous users2024-01-22

    Can't get it? It is recommended that you draw a floor plan and then send it to see, the room will not be so big that there is no wireless signal in the general family.

    If you are sure to add a router, then connect a line from the LAN port on your superior wireless router, connect to the WAN port of the new router, and then enter the new router settings interface and change to AP mode, so that you can do it.

  4. Anonymous users2024-01-21

    The wireless signal will be attenuated a lot after passing through the solid wall, and it may be that the structure of your house causes you to not receive the signal in the bedroom (if your home is hundreds of square meters, several walls), you will generally receive the signal more or less.

    If you want to add a wireless router in the bedroom, then there must be a network cable to enter the bedroom first, and the WAN port of the wireless router must have an external network to come in.

  5. Anonymous users2024-01-20

    Can I get a signal when I open the door? If you don't have to, you can't put a wireless router in your room. You can consider putting a wireless router at the door to make a bridge. This way there should be a signal in the room.

  6. Anonymous users2024-01-19

    Connect the LAN port of the wireless router in your hall to the LAN port of the wireless router in your bedroom, and that's it.

  7. Anonymous users2024-01-18

    OK.

    Root the network cable from the wireless router in the living room, pull the network cable to the room, and connect the network cable to another wireless router in the room.

  8. Anonymous users2024-01-17

    Ordinary wireless routers have a relay function, which allows two wireless routers to bridge to expand the wireless signal.

Related questions
1 answers2024-07-05

How did God rot and take it? Are the two routers connected? >>>More

6 answers2024-07-05

Under normal circumstances, it may be due to the fact that the signal of the router is not too strong, and then after passing through a wall in your room, it will be weakened, so the most direct way to solve this problem is to change to a router with a stronger signal Under normal circumstances, when choosing a router, the boss will tell you the approximate selection method and the quality of some routers, the better the quality, of course, the more the price, but in general, it is not much expensive, a few dozen dollars is enough. Of course, if this method still does not work, then I can recommend you the following methods: >>>More

1 answers2024-07-05

Buy a WIFI signal amplifier to prevent the middle of the room and the living room.

2 answers2024-07-05

Whether the router is set up or not, change to a new router, and reset the router dial-up Internet account.

4 answers2024-07-05

You have been eliminated, and you are still using such things, and now you buy a wireless repeater, which is a matter of dozens of dollars, and directly use the wireless relay WIFI to expand the range of use of this signal. Quite convenient.