-
Anonymous users2024-01-24Precautions for waterproofing the bathroom floor.
The renovation of the bathroom is one of the key parts that the owner pays the most attention to, and the waterproofing of the ground is the top priority of the toilet renovation.
In order to make the owner clear and clear about the floor waterproofing of the bathroom, the following suggestions are put forward on this issue:
Demolition of walls and floors.
It is very important to remove the wall and floor of the bathroom, which directly affects whether the waterproofing of the bathroom can be done at one time.
Demolition requirements: the wall must be removed to the bottom layer; Ground culling to floor level; Walls, floors, wall-to-ground junctions, no.
Concrete sharp angles must be left; There shall be no rebar heads; There must be no unevenness.
2.Do the protective layer:
On the waterproof layer、
The purpose of the protective layer is to protect the waterproof layer from being damaged by the sharp clucking below the waterproof layer, and the heavy objects or edges and corners above.
3.Waterproof coatings.
The waterproof coating shall be a qualified product that meets the requirements of national and local regulations.
4.Brush with waterproof paint.
Generally, waterproof paint is basically used for home decoration, and waterproof paint must be brushed with a brush, not rolled with a roller, and it must be next to a brush.
A brush brush, there must be no omission;
Be sure to pay attention to the waterproof coating at the junction between the root of the wall and the ground, and be sure to brush it in place;
The waterproof coating of the ground should be with the wall.
The waterproofing coatings are joined together to form a basin-like pattern.
5.Closed water test.
After the protective layer on the waterproof coating dries, it is necessary to carefully do the closed water test in accordance with the relevant regulations. Don't be perfunctory.
I hope that the above precautions can provide some help to the owners and friends of the decoration.
-
Anonymous users2024-01-23Hello dear! The bathroom does not need to install a door stopper, if you want to install one, you can choose a wall door stopper!
It is best to wait for dryness before doing waterproofing, if it continues to be wet, it will affect the condensation of waterproof materials.
Be sure to lock the door. Don't install the bumper beads, that thing is not good. If you install the bumper beads, then you have to install a bolt inside (this is not good-looking, it is a big move), otherwise the door can be opened all the time, and relatives and friends go to the toilet in the inconvenience. >>>More
First of all, there is no settling tank on the bathroom floor, if there is no settling tank, you can use polymer with white cement to brush the ground, but it is not recommended to use it like this, the general ground is recommended to do one-component polyurethane waterproof coating, you can use rainbow SPU-301
The responsibility of the bricklayer, when laying floor tiles, the floor drain is not the lowest point, you can ask the cherished company to cut the ground and re-pave the floor tiles.
Before the bathroom is waterproofed, whether it is the use of waterproof paint or mortar waterproofing agent, it is necessary to clean the base surface to ensure that there is no oil and dust, and then sprinkle water to moisten, so that it is not easy to dry and solidify too quickly after painting, resulting in a waterproof layer. >>>More