-
Anonymous users2024-01-24Before the bathroom is waterproofed, it is necessary to chisel the ground first, and then backfill and level, and then start to brush the polymer waterproof membrane after backfilling and leveling, and then dry it to a depth of 30 cm in full water, and carry out a closed water seepage test for 48 hours, which is generally done twice to be qualified, so as long as you ensure that these processes are done, there will generally be no problems!
-
Anonymous users2024-01-23It is recommended that after the water is changed, you can do a pressure test to test whether there is air leakage in the pipeline.
After doing the waterproofing, you can do the closed water test, and it is generally no problem to waterproof it twice, mainly the edges and corners, and the position of the water.
Cover it with an open wire pipe, because the tile is porcelain white, and the open wire pipe is also white, there is no color difference, the open wire pipe is square, you can choose how big the open wire pipe is according to the number of wires, the open wire pipe can be fixed along the corner of the wall, the general hardware store of the open wire pipe is more, economical and convenient, the method of installing the open wire pipe, use a few points of glue on both sides, and put transparent glass glue between the points, and press the open wire pipe in the position you want to install.
Causes of resurgence of moisture in the bathroom.
1. The waterproofing of the bathroom is not done well. >>>More
First of all, we should first observe the walls around the bathroom of our home to see if each wall is bulging or peeling, if the position of the bulging or peeling is about 30 cm up by the ground, it means that the position of the corner of the bathroom is leaking, if it is in the middle and upper part of the wall there is bulging or peeling, it means that the part of the wall is not waterproof. >>>More
1. How to deal with water seepage on the bathroom wall? >>>More