-
Anonymous users2024-01-24Check that the angle valve is open.
Check whether the hose is deformed or bent.
Check that the inlet valve is not stuck.
Pull the float down with your hand to see if it gets into the water.
If these tests are done, the water does not come out.
Then call the after-sales service to directly replace the water inlet valve.
-
Anonymous users2024-01-23Is it that the filter of the stool neck is blocked?
It feels like the limiter didn't fall, and it got stuck on the side of the toilet.
What you mean is that your water tank does not flush, but if it is not flushed, the water in the tank should always be full, the water tank will not enter the water when it is full, and you will not see the water spraying phenomenon, and there will be a small flow of water to the toilet, if you can send a photo after opening the top cover, it will be easy to analyze.
The float in the tank drives the water inlet valve of the water tank, when the float floats up and the valve is not closed, and the water continues to enter, it must be a problem with the valve, so you have to check the valve, whether the link between the float and the valve is loose, or the valve is broken, and then it is easy to deal with. >>>More
Close the water valve and remove the water inlet to clean up.
If it is an old-fashioned float tank fitting, it may be that the height of the float is not adjusted properly, or the valve for water inlet is open. If it is a new tank fitting without a float, it may be that the water inlet part is too tight or fails. Actually, it's a very simple thing, but the text is not very clear. >>>More