The chandelier in the living room is remotely controlled, the spotlight and the chandelier are conne

Updated on Living room 2024-07-09
3 answers
  1. Anonymous users2024-01-24

    It's actually very simple, first buy a remote control switch. (Generally 6 binding posts, yellow, white, green, red, black, black).

    First, each lamp doesn't have two wires, take a lamp wire from each lamp and connect it all together, and connect it to the neutral line of the remote control switch. (usually a black line).

    Second, connect the remaining wire of the lamp to be controlled to the control line of the remote control switch, (generally yellow, white, green, one lamp is connected to a binding post, for example, there are 3 lights, they are connected to these three binding posts).

    Third, connect the mains to the red wire (live wire) of the remote control switch, and connect the black wire (neutral wire).

    That's OK

  2. Anonymous users2024-01-23

    Hello! I have encountered this problem you said, I am a professional maintenance electrician, the problem is that there is a controller inside this lamp, buy a controller and remote control on Taobao.

  3. Anonymous users2024-01-22

    There are drops, look at my profile....~!The latest American dramas and Japanese dramas don't cost anything.

Related questions
8 answers2024-07-09

It is more common to use yellow light, you can connect two kinds of light strips at the same time, one with yellow light, and the other can also try to use blue light, which are two different atmospheres and feelings. You can adjust it yourself. It can also affect the mood. Hope it helps the landlord.

1 answers2024-07-09

There are several reasons for this, the first may be the failure of the control circuit with remote control (first check whether the line is loose and fall off, then confirm whether the remote control battery is electric, and finally check whether there is an obvious fault area such as burning); The second is the failure of the LED lamp itself (caused by the failure of the LED driver power supply or the LED lamp itself).

1 answers2024-07-09

It can be repaired, that is, the controller inside is broken, find a lighting store to buy a controller, and ask a master to help replace it. A set of remote controls is about 100 pieces. If you ask the master to repair it, it depends on what kind of lamp you have, if the lamp is complicated, it is very troublesome to disassemble, and it is more troublesome than installing a new one, and it is estimated that it will cost 200 maintenance!

5 answers2024-07-09

Regarding the size of various downlights and spotlights for decoration, it is necessary to communicate with the designer about the size of the ceiling lamp, and the downlights are generally 8 cm, 10 cm, and 12 cm; Spotlights are generally 5 cm, 6 cm, and 8 cm. The size of the living room chandelier should be selected according to the area of your living room, and the height of the living room chandelier should not be less than 40 cm and the length should be 800-1000mm; Width 600-800mmRemind you that it is best to communicate with the designer before determining the size. . .

1 answers2024-07-09

Lighting installation misunderstanding 1: There are too many spotlights at home. >>>More