What should I do if the bathroom wall on the first floor is not waterproofed? The tiles have been pa

Remove the tiles, redo the waterproofing and then paste it. Not only the walls, but also the floor. The wall surface is at least 1.8 meters or more. Even on the first floor, it is possible to seep through the threshold or the wall to the adjacent room.

I am a professional waterproofer, and I have been doing it for 20 years, and I have dealt with this kind of thing a lot, because the bathroom has to take a shower and wash clothes. Water seepage on the wall affects the wall of the sanitary partition, now the tiles have been pasted, I don't know how long your home has been renovated, if you use it for a period of time there is no problem, then forget it, if there is a problem, you can clean up the tile joints with water and do not leak the joints. Or treat it with Henkel's tile grout, no problem.

There is no way to knock off the tiles and re-do the waterproofing.

Normally, these problems should be considered when decorating.

Like a bathroom. Places where water is common, such as kitchens and balconies, must be waterproofed.

And it must be done well.

If the master sticks it well.

It's not a big problem not to do it.

Because there is very little water on the wall.

Even if there is, it will flow to the ground immediately. The impact is not very large.

There is some truth in what your master said.

If you dare to use it, you will definitely have to leak water downstairs, and the residents downstairs can tolerate you leaking water every day? The only way is to dismantle it and re-do the waterproofing, and then paste the tiles after the waterproofing.

When the bathroom is decorated, the specific steps must be clear, don't just find a person who doesn't understand anything and start decorating, which is very unreliable.

1. Hydropower and pipeline transformation. Hydropower renovation must be conceived in advance, because it is also a meticulous work. Now the decoration pipes are dark pipes, and the hot melt pipes are generally in the wall, so someone at home has to follow to take a look, if you can't remember, it is recommended to take a picture with a mobile phone, so that it will save a lot of unnecessary trouble when repairing in the future.

2. Waterproof treatment. The waterproof test must be tested for 24 hours or more to be considered accurate. To put it bluntly, the bathroom is a water cellar, don't look at the top is very clean, there is actually a lot of water under the floor, if the waterproof is not done well, it will leak to the residents downstairs, which will bring more trouble.

3. Tile pasting. When pasting tiles, they will generally be pasted from top to bottom, from left to right, and after such a step, the tiles will be pasted perfectly and beautifully.

Fourth, pipeline sound insulation treatment. Some residents won't do this, if you're afraid of the trouble of running water, it's better to do it, and it doesn't cost much.

Fifth, the ceiling. After the tile is pasted, the ceiling can be made only when the tile is completely dry, so that it will not affect the tiles on the ground and change the slope of the tiles just pasted.

Sixth, the installation of bathrooms and others. Finally, there are supplies such as toilets, washbasins, and water heaters.

If you decorate the bathroom, you must buy all the things used in advance, you must have a plan in your mind, my friend re-installed the bathroom a few years ago, because the master who was looking for is a person, so the working hours are relatively long, and it took ten days to complete the installation.

The bathroom wall on the first floor is not a big problem, even if there is a little leakage is leaked into the ground, does not affect your life, the bathroom is generally not waterproof, there are few leaks, in addition as long as it is not a serious water leakage, and the tiles are pasted, and then do the waterproof loss and engineering is not small, I think there is no need to do.

The solution is to deal with the gaps in the bathroom tiles.

The first method can use the most common beauty joint agent at this stage to retouch these tiles. The key to control here is that the tile should not be cracked after the seam is opened. What you need to do is to ensure that the gaps of the bathroom tiles are tight, so that the water does not penetrate down through the gaps, so that the leakage of the bathroom is fundamentally solved.

The second method is to use a waterproof adhesive that is used to repair the cracks in the restroom. This type of glue is sold in many places, and it is very simple to operate. After cleaning the gaps, you can directly brush these glues.

The point is, what's behind that wall of yours? In order to do waterproofing, this wall is not the main frontal surface, if the outside of the wall is an outer wall, you can ignore it, if the inner wall is not wet, you don't have to tangle, fill the gaps, the chance of water leakage is very small, I also agree with the statement upstairs!

There are waterproof transparent colors, as long as you brush four or five transparent waterproofs between the gaps in the tiles.

It doesn't matter much. Buy caulk to wipe the gaps in the tiles and generally won't leak.

There is a brushed waterproof material on the Internet,Brush it according to the guidance method,

You can only mend the seams, or you can only turn it over and start over, the cost is too big and boring, I suggest that you use it, and the problem will not be big on the first floor.

Rework, immediately call the workers to do a good job of waterproofing. This does not damp and seeps water.

Transparent penetrating colorless silica waterproofing agent sprayed on both sides.