How to clean the mirror in the bathroom

Soap to prevent blurring of the mirror Apply some soap to the mirror and rub it with a dry cloth to form a protective film that repels steam. If you have an unwanted perfume, it is better to use it to wipe the mirror.

There is a magic way for mirrors to prevent fogging.

Types of mirrors.

According to the material, the mirror can be divided into two categories: aluminum mirror and silver mirror. The silver mirror is bright, the mercury density is high, it is easy to fit closely with the glass, it is not easy to get into the water and moisture, and it can be used for a long time, so the waterproof mirror sold on the market is mostly silver mirror. Aluminum mirror due to the aluminum layer is easy to oxidize, the mirror surface is dark, and the aluminum layer and the glass fit is not tight, if the side seam is not tightly sealed, the moisture will enter from the void, the aluminum layer will peel off after the water intake, the mirror surface is easy to deform, the use time, the price is lower than the silver mirror.

The so-called waterproof mirrors are not all anti-fog. The temperature of the mirror is low, and it is inevitable to encounter hot gas fogging, so the current anti-fog mirror is basically equipped with a heating device in the back, and the price is expensive. In fact, in real life, we can use some common daily necessities to solve this problem.

Which one is easy to use, you can see below.

1.Cleansing spirit

Do not dilute, apply some to the mirror and wipe off with a dry cloth. The active ingredient contained in Cleaner can effectively prevent water vapor from condensing on the mirror surface, so it can play an anti-fog role. In the samples tested, the area where the detergent was applied for the longest time had the best results.

Moreover, the water vapor disperses the fastest.

2.Moisturizer

It is better than nothing at all, and it has a certain ability to resist water vapor, but it also affects the transparency of the mirror after application, and the anti-fog ability is limited, and it will be blurry after 20 seconds.

How to care for your mirrors.

When mirror glass is used, it is generally cut, and where the glass knife is cut, water vapor can easily enter the mirror surface from the side. Over time, it will corrode the mirror surface, resulting in mildew and rust spots. So you might as well apply a coat of paint to the side of the mirror after you buy it, and even better if you also paint a coat on the back.

Usually, wipe the surface of the mirror with a dry soft cloth often to keep the mirror dry and tidy. Try not to wipe it with a damp cloth, otherwise the mirror will be blurry and the glass will be easily corroded.

Try it with milk, it is very bright after rubbing, this method is only tried at home.

Rub with a rag and rub it with newspaper.

As soon as I looked at it, I knew that I hadn't touched the window when I went to school.

1.White vinegar and salt: First of all, prepare a container, bowl, dish or basin, and then pour the white vinegar inside, pour as much as you want, feel that your home is too dirty to pour a whole bottle, but remember to control the proportion of salt, pour in after adding salt and stir evenly, and then use a spray bottle, this kind of spray bottle can be bought in many places, such as a good product is sold, and then when you want to clean up the stain on the mirror, spray it with it, and then wipe it with something, and it will be clean immediately.

2.Soapy water: Dip the soap in some water and apply it on the mirror surface, not too thick, not too little, not too much water, but it must be wet. Use a dry towel to wipe off the soap with a little force, and use the kind that won't remove hair.