-
Anonymous users2024-01-24Either fill the level, or make an internal sliding door, but the thin wall in the bathroom has space to push and pull.
-
Anonymous users2024-01-23If the toilet door wall is thick and thin on one side, you can open the door to which wall is thin, which is not very affected.
-
Anonymous users2024-01-22Either fill the level, or make an internal sliding door, but the thin wall in the bathroom has space to push and pull. The welding grab is mainly put on the thick side, let the thick side melt, and drag the melted welding rod to the thin side, basically this is the suggestion, you can refer to it according to your like, this is also nothing stipulated, as long as you like it, you can refer to it.
Toilets are generally easy to disassemble, I remember that the Anwar toilets that my family bought at that time were all installed and the service was very good.
Bedroom on one side of the toilet and one side of the balcony, generally if the bed is facing the toilet in the bedroom, it is generally not good, but it has little impact on the balcony, and there are generally two ways to do the wardrobe. >>>More
As long as the bathroom door and the kitchen door are not facing or next to each other, it will not be mutually restrictive But you had better change the kitchen or bathroom door in one direction to rush out or to the window so that it is good Feng Shui is said to be trustworthy and responsible, and there is no belief in responsibility Don't worry too much The important thing is that the pattern should be close to the convenience of life is better.
Sprinkle toilet powder and soak it for a while, then rinse it twice to be clean.
This is the problem of the drain valve in the water tank (the device under the toilet button), you see if there is a foreign object under the sealing gasket that does not pop up in the box (some plastic bags of toilet certificate or 6MM small hose cushion are underneath), remove the foreign body and seal it normally and flatten.