-
Anonymous users2024-01-24Are you going to dismantle the lamp tube or the light disc?
The lamp is plugged in, and it can be unplugged directly;
The lamp plate is recessed, and the inside is fixed with a spring, and a flat screwdriver is used to pry open a little gap, and then it can be removed by pulling it down.
-
Anonymous users2024-01-23This is more troublesome, and you need to remove the gusset one by one.
-
Anonymous users2024-01-221. Suction the corner of the gusset with a suction cup, pull it down, and then slowly pull it off.
2. You can also use a slotted screwdriver or a small electric pen to lift out some of the aluminum buckle plate around the lampshade, and then you can dismantle the lamp.
If you look around, there should be a place where you can get stuck, and you should be able to open it with a screwdriver.
If it is an integrated roof, it is easy to disassemble, first remove the aluminum block next to it, and then disassemble the lamp.
Room faucet dismantling.
1. The most important step before disassembling the faucet is to close the main valve, otherwise it will lead to the spray of tap water, not to mention wasting water, and also increasing the burden of cleaning the kitchen. >>>More
You this is the method of integrating the ceiling, generally it is directly cut down, yes, it is cut out, it is directly stuck on the top of the net when it is installed, the general situation is to cut it down directly, it is more tight to use a little force, but pay attention not to damage the ceiling, and finally be sure to turn off the power switch, you can disassemble the lamps and lanterns to ensure the safety of life, remember, remember, remember!!
Learn from the Internet: The sofa is generally cleaned from 5 angles: 1, fire prevention 2, moisture proof 3 children (play) 4, household use 5, neighborhood harmony. Forget it, I can't remember. That's probably it, it's clear.