What should I do if there is no hot water in the bathroom washbasin?

Summary. Hello, I'm very happy to answer for you, the bathroom washbasin here does not come out of the hot water should be connected to the hot water pipe, it is recommended to ask a plumber and electrician, check whether it is connected, or yes, the triangle valve, has it opened for reference.

What should I do if there is no hot water in the bathroom washbasin?

Hello, I'm very happy to answer for you, the bathroom washbasin here does not come out of the hot water should be destroyed is the hot water pipe connection is not hot and the residual water is recommended to ask a plumber to check whether it is connected, or yes, the triangle valve, has it been opened for reference.

Hello, I'm very happy to answer for you, what to do if the sink doesn't have hot water here1, first check whether the valves of the hot water pipeline are closed, if closed, please open; 2. If the valves of the hot water pipeline are open, then see if there is water, if there is water, it is the pipeline is cracking; 3. If the pipeline is normal, it depends on whether your water heater is working normally, turn on the hot water faucet, let the water flow naturally, and then touch the joint of the hot water pipe to see if there is temperature, if there is no temperature, it means that the water heater is faulty; 4. If it is a gas burner, first see if your home gas is sufficient, take the gas stove to test, the gas stove can be turned on normally, that is gas, if you open the gas water heater and there is still no hot water, it is bad stove and need to find someone to repair it; If it is a heating fault of electric heating, then pay attention to safety, cut off the power first, and then find someone to repair it.

The reason why the bathroom washbasin does not produce hot water is caused by the failure of the triangular valve of the water heater.

The solution is: if the triangle valve of the water heater is blocked, you need to contact professional maintenance personnel in time to clean the triangle valve of the water heater, which can solve the problem that the washbasin does not produce hot water.

Turn on the faucet switch on the top of the basin and rotate it to the direction of hot water; In the water supply line is normal, electric water heater.

In the case of normal operation, if there is no water flowing out of the faucet, the water inlet switch belonging to the electric water heater is not turned on, and it is okay to turn on the water inlet switch. When the electric water heater is energized normally, cold water is always discharged, which is a fault inside the electric water heater.

Extended information: The introduction of hot water in the water heater is as follows:

Gas water heaters.

If the water pressure is too low and the fire cannot be ignited, try to increase the water pressure. If the faucet gets stuck, even cold water won't come out. If the hot water pipe is blocked is not a one-time thing, the hot water flow must be from large to small, and it should have been discovered a long time ago.

If the water pipe is broken, this is not possible; If the water pipe bursts, the house would have been flooded long ago. The above is a general situation, but special circumstances may arise. If the water heater does not produce water, it may be that it is not cleaned regularly, causing the filter to become clogged.

The limescale inside the water heater tank was not cleaned regularly, resulting in a build-up of rust stains clogging the filter screen at the water outlet.

If there is no hot water, you first need to check whether the hot water is sufficient, and if you are sure that there is hot water, you need to check whether the pipe is blocked.

If the triangle valve of the water heater is blocked, you need to contact a professional maintenance personnel in time to clean the triangle valve of the water heater, which can solve the problem that the washbasin does not produce hot water.

Is it that the hot water has never been out or has it not been out recently? If it has never been out, then you should check whether the lower tubing is connected correctly. If it is only recently, you see if there is hot water in other faucets, if other faucets will leave hot water out, it may be that there is a problem with the mixing valve, try replacing a mixing valve.

It is best to find a professional, follow the hot water route backwards to find, if necessary, you can disassemble the faucet for inspection, there may be a pipe blockage, there may be a valve stuck, the handle will not come out of the water when opened, do not burn it by yourself.

If there is no hot water, check the source of hot water, if the water heater is not working, it may be that the water heater is not working properly, if the wall-hung furnace is not working, check the water flow size, and the water flow sensor.

There is no hot water, it is a problem with the installation. The hot water should have a separate pipe to merge with the cool water pipe of the footbath, in this case, the adjustment knob will do, you can find a professional maintenance personnel to see.

There is no hot water in the washbasin in the bathroom, and it is very likely that the water pipes in the place where you are getting hot water are blocked.

First of all, check the triangle valve of the water heater, in addition, the hot water will produce scale, so check whether the outlet pipe of the hot water is blocked.

Toilet paper toilet wash face next to the r bathroom washbasin does not come out of hot water, that means it is the bathroom. The bathroom washbasin does not produce hot water, which means that it is the bathroom. The hot water pipe bathroom washbasin does not produce hot water, which means that it is the bathroom. The hot water pipe is clogged

First of all, I think you should still find a professional maintenance personnel to see what is the problem?

Different shapes of ceiling lamps have different disassembly methods.

1.Round ceiling light.

Round ceiling lamps are one of the more commonly used ones at present, and their disassembly method is very simple. First cut off the power supply, and use a screwdriver to remove the screws around the lampshade, and then remove the lampshade in a rotating way, you can directly take the bulb and change the bulb.

2.Square ceiling light.

The square ceiling lamp is a unique kind of ceiling lamp. Although the square ceiling lamp seems simple, the disassembly method is actually very complicated. The first is to turn off the power and remove the lampshade, since it is square, you have to start with the four corners.

Then use the hook to absorb the aluminum alloy part, and then slowly pull it down, pay attention to adjust the angle, and do not destroy the ceiling lamp. When you remove the lampshade, you will be able to see the bulb.

There was a problem with the faucet of the washbasin connected to the hot water line!

It may be a blockage or the snakeskin tube is bent less than 90 degrees, resulting in no water!

See if the tee of the hot water is turned on.

The mouth of the faucet is removed and cleaned and OK!

Summary. The water heater valve is blocked.

What should I do if there is no hot water in the bathroom washbasin?

The water heater valve is blocked.

If the triangle valve of the water heater is blocked, you need to contact a professional maintenance person to clean the triangle valve of the water heater in time, which can solve the problem of no hot water in the washbasin.

Toilet bai

The reason why the washbasin does not produce hot water is: the fault of the triangle valve of the hot water dispenser is blocked.

The solution is as follows: If yes.

If the triangle valve of the water heater is blocked, you need to contact professional maintenance personnel in time to clean the triangle valve of the water heater, which can solve the problem that the washbasin does not produce hot water.

Turn on the faucet switch on the top of the basin and rotate it to the direction of hot water; In the case that the water supply pipeline is normal and the electric water heater is working normally, if there is no water flowing out of the faucet, the water inlet switch belonging to the electric water heater is not turned on, and it is okay to turn on the water inlet switch. When the electric water heater is energized normally, cold water is always discharged, which is a fault inside the electric water heater.

Turn on the faucet switch on the top of the basin and rotate it to the direction of hot water;

If the faucet does not flow out, the water inlet switch belonging to the electric water heater is not opened, and the water inlet switch can be turned on.

When the electric water heater is energized normally, cold water is always discharged, which is a fault inside the electric water heater.

If the water pressure is too low and the fire cannot be ignited, try to increase the water pressure.

If the hot water pipe is blocked, it is not a one-time thing, and the hot water flow must be from large to small, which should have been discovered a long time ago.

If the water pipe is broken, this is not possible;

If the water pipes had burst, the house would have been flooded long ago.

The above is a general situation, but special circumstances such as ...... may occur

Has the landlord's problem been solved? What is the reason, I also encountered this situation.

There is no hot water in the bathroom washbasin.

It should be that the hot water pipe is connected and there is no hot water.

It is recommended to ask a plumber and electrician to check whether it is connected

Alternatively, the triangle valve is not opened for reference.

Unscrew the hose of the hot water to see if there is water, if there is water, it means that the faucet is broken, and if there is no water, the pipe is broken.

Can you get hot water anywhere else? If so, there may be a problem with the route of the washbasin water.

The bathroom washbasin does not produce hot water, one is that the hot water pipeline is blocked, and the other is that the valve of the pipeline is closed. In the third case, the washbasin mixing valve is broken, resulting in the inability to supply hot water.

If the bathroom washbasin does not produce hot water, it should be that the hot water supply pipeline is blocked, or the valve of the pipeline is closed, resulting in the inability to supply hot water.

I start checking it from the hot water section door of the washbasin ---!

Unscrew the tap outlet hose-

Turn on the faucet -- and see if it can produce hot water

If there is hot water -

That's it - the hose to the tap water outlet --- blocked!!

Generally - caused by fine grains of sand!!

In this case, the water heater should be repaired, and I am really helping you look forward to it

This is on the valve, the valve to the south or north to the right twist, it should be hot water, cold water!

Let me come to your question, what should I do if the bathroom basin does not have hot water?

I think it's a very simple problem to solve.

The solution is as follows:

1.You can turn off the front of the basin, the incoming water (cold and hot) valves.

Then remove this valve, take this valve apart, and see if the inside of the valve that puts hot water is blocked? It's okay to fix him, it's not that hard.

2.If you disassemble this valve, if the valve for putting hot water is broken and can no longer be used, you can take this old valve to the hardware store and buy a new one according to the model of this valve, and take it back to the upper one.

3.If you have finished repairing or replacing it, please open all the hot and cold water valves at the front of this washbasin, try the cold and hot water if they are all good, and all this is done!

I've explained the above steps very clearly, and you will definitely understand them.

If I can help you solve your urgent need, please give, thank you!