How to dismantle the toilet, how to dismantle the toilet

01Check the old toilet bowl for cracks.

Please pay special attention to the place where you will lift the toilet with your hands, because the toilet is made of ceramic magnet and will cut people like glass, so wear thick work gloves when moving the toilet.

02Pick up the water tank lid - remove the water tank cover.

Take the lid to a place where it won't touch.

03Turn off the water source.

The location of the water valve is on the left side of the toilet.

04Rinse the water in the water tank, press the flush handle and do not put it, let the water run completely, wear rubber gloves, and use a sponge or towel to dry the water in the water tank that has not flowed away.

05Use a small disposable container to scoop up the remaining water in the toilet bowl and dry the remaining water in the toilet bowl with a sponge or towel.

06Remove the connected water hose from the toilet.

Pour excess water into a bucket.

07 Connect the water tank to the toilet seat. The bolts may not be removed and the tank may not be removed, and it can sometimes take several hours.

08Remove the nut and the bolt for fixing.

Sometimes the bolt turns, so use a hacksaw to cut the bolt.

You can buy a single-handle saw that is easy to use in a work area where space is limited.

09If your toilet seat is glued to the floor with gap filler, use a tool knife to cut the sealant open10Gently shake the toilet bowl to loosen the toilet bowl from the sticky sealant11Ask another person to help lift the toilet bowl. At this point, keep your back straight, and use your legs to support the weight of the old toilet bowl and put it in a place where it will not hinder your work, and put a rag or towel underneath it, as it will be a little dirty.

Otherwise, you can put it on a rag or plastic sheet and drag it away.

12Plug the drains with rags so that the sewer gas doesn't escape.13 If the fixing bolts are broken, remove them and replace them with new ones.14Use a putty knife to scrape off the flanges and the old sealant on the floor.

This one is very simple, follow the steps I said.

First, unscrew the connecting pipe between the toilet bowl and the wall. Then shovel off the white sealant under the toilet bowl with a razor blade, and the toilet bowl can be taken down.

When installing, first clean the toilet eye, there can be no sewage, put the toilet bowl with its own eye on the ground, and then put it flat after aligning the toilet hole on the ground, and then lift the toilet left and right to put a circle of glue on the inside, and then play it when it is flat on the outside of the toilet.

A circle of glue to connect the pipe to the wall, do not use water for 42 hours after installation, and wait for the glue to dry.

Answer: 1 First of all, observe whether there are cracks in the toilet, because the toilet is generally made of ceramic, and if there are cracks, it is easy to hurt the construction personnel in the process of removing the toilet. Therefore, wear gloves during construction, and then remove the water tank cover and put it in a place where there is no water, turn off the water source to remove the water in the water tank, and be sure to press the handle of the water tank and do not put it, so that the water can be discharged completely.

2.Use a tool to remove the remaining water from the toilet bowl, and then use a dry rag or sponge to wipe the water inside the toilet bowl dry. Then remove the hose that connects to the toilet bowl and pour the excess water into the bucket.

3.Use a hacksaw to cut the screws connecting the water tank and the toilet, and you can prepare a small single-handle saw to facilitate the use of small spaces. If the toilet is glued to the floor with gap filler, then use a tool to cut the sealant directly, then gently shake the toilet to loosen the sealant, and then lift the toilet bowl, pay attention to keep its back vertically raised, and put it next to it.

At this time, be sure to block the mouth of the drain pipe with rags or other things to prevent the odor of the sewer from running out and debris from falling into the drain.

How to remove the smart toilet lid - how to remove the smart toilet seat.

Method 1 to change the toilet seat: find the screw cap, remove it with a live hand, and then replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark.

In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid. If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

Method 2 of changing the toilet seat: When replacing the toilet seat, you only need to remove the fixing bolt on the back of the toilet to replace it; When installing, you can operate in the opposite direction. Most toilet seats are large or small, and you can simply adjust the two bolts when installing.

However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it. Method 3 of changing the toilet seat: In addition to the above two methods, it is recommended to find a professional to replace it.

Some workers who change toilet seats offer free replacements, but to use the products they provide, the slightly more expensive price of the products already includes their labor costs.

Method 4 of changing the toilet seat: If the toilet seat is not necessary to be replaced, but only partially broken, a small amount of repair can be carried out if it is not serious, and it can still be used to save money.

The above is to introduce the installation and removal methods of the smart toilet seat. I believe that everyone must have more or less understood the installation and removal of smart toilet seats after reading the finishing. However, it is important to remind you that the installation and removal of smart toilet covers still depends on the situation, not all situations are handled by yourself, and those who cannot solve it by themselves still ask professionals to install and disassemble.

I knocked the cement down and went down.

Use a paper cutting blade to cut the glue at the junction between the toilet and the floor. It's time to remove it.