How to maintain high end solid wood furniture?

Updated on Solid wood 2024-07-02
1 answers
  1. Anonymous users2024-01-24

    Muyan Muyu solves your worries! High-grade solid wood furniture has water content in it, and when the air humidity is too low, hardwood furniture will shrink and expand when it is too high. According to the national standard, it should be controlled at about 8-12.

    Generally, high-end solid wood furniture has a lifting and shrinking layer during production, that is, the treatment of expansion joints. However, you should be careful not to put it in a place that is too humid or too dry, such as near a high temperature and high heat place such as a stove heating, or a place that is too humid in a basement, so as not to cause mildew or dry cracking. Generally, it is advisable for people to feel comfortable wearing a sweater indoors.

    There are two kinds of high-end solid wood sofas, and the traditional solid wood furniture generally has no lacquer layer on the surface, just hot wax. Now the surface of the newly produced high-end solid wood sofa is protected by lacquer or varnish. There are differences in the maintenance methods of solid wood furniture with different treatments.

    If the floor is low, the furniture legs must be properly raised if the ground is wet, otherwise the legs are easily corroded by moisture. In the summer and summer, it is necessary to frequently turn on the air conditioner to drain moisture, reduce the moisture absorption and expansion of wood furniture, and avoid the cracks caused by the wet expansion and deformation of the tenon structure. When handling or moving furniture, it should be handled with care, and should not be pulled hard, so as not to damage the mortise and tenon structure.

    If the floor in the room is uneven, it will cause the furniture to deform for a long time, so the way to avoid it is to use small pieces of wood to flatten it. Never wipe with a damp cloth or a rough rag, especially on a hardwood sofa. Use a clean and soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub it back and forth along the wood grain.

    If wiped with a damp cloth, it should be wiped with a dry cloth immediately after wiping. Due to the different surface paint treatments of various furniture, it should be noted that waxing is a good maintenance method. Wooden high-grade solid wood sofas should not be damp and exposed to sunlight, and curtains should be set up next to the window.

    To clean the wooden sofa, you can mix it with warm water (about 1:20 ratio) with neutral soap silk, then wipe it with clean water, and dry it with a dry cloth to reduce the chance of stains getting stuck on the surface of the wooden furniture. You can also buy wooden furniture maintenance oil spray, which has some protective effect.

    Chemical brighteners should not be used to avoid sticky damage to the paint film. High-end solid wood furniture should be placed indoors away from doors, windows, tuyeres and other parts with strong air flow, and should not be exposed to sunlight.

Related questions
3 answers2024-07-02

Ebony wood furniture maintenance methods.

1. One of the maintenance methods of ebony wood furniture is to adhere to air humidity. Don't be too cold or too hot, otherwise the ebony wood furniture will simply present a circle of gaps, which will affect the use of the ebony wood furniture. >>>More

2 answers2024-07-02

In daily life, housewives often have to clean and maintain their furniture to keep them shiny. But you may not know that some wrong cleaning and maintenance methods, although they can temporarily make the furniture clean, actually cause potential damage to the furniture, and with the increase of use, your furniture will have irreparable problems. >>>More

9 answers2024-07-02

Solid wood contains water, and hardwood furniture shrinks when the air humidity is too low and expands when it is too high. Generally, solid wood furniture has a lifting and shrinking layer during production, but it should be noted that it should not be placed in a place that is too humid or too dry, such as near a high temperature and high heat place such as stove heating, or a place such as a basement that is too humid, so as not to produce mildew or dry cracking. And don't place too heavy items on the surface for a long time, especially TVs, fish tanks, etc., which will deform the furniture. >>>More

9 answers2024-07-02

First of all, a soft cloth is often used to dust the furniture along the grain of the wood. Before dusting, a soft cloth should be dipped in some spray detergent, do not wipe with a dry cloth, so as not to wipe the flowers. When solid wood furniture is used in a drier environment, artificial humidification measures are required. >>>More

5 answers2024-07-02

Nowadays, many people have a soft spot for solid wood furniture, because solid wood furniture mainly caters to people. >>>More