-
Anonymous users2024-01-24There are two common reasons why the toilet is not flushing:
1.The side handle chain of the side-press and side-wrench toilets is long, which causes the water-stopping pad to stop the water quickly, although it moves. Workaround:
Please shorten it to an appropriate size. Or the top press bar of the top press toilet is low, resulting in the water stop pad moving but quickly stopping the water. Workaround:
Open the water tank cover, reverse, loosen the nut of the pressure bar, and adjust the length of the pressure bar to the appropriate one.
2.The water level of the inlet valve is low, resulting in weak water outlet.
The solution is to remove the inlet valve and remove the inlet valve buckle. Turn the inlet valve body counterclockwise. Then increase the height of the body accordingly.
Then rotate the inlet valve body clockwise and attach the buckle. Finally, install the inlet valve. Connect the filter and water inlet pipe, and the fault can be eliminated.
-
Anonymous users2024-01-23Hello: first see if the water tank is full, if it is not full, the hidden round jujube is the hose connected to the toilet that has a filter screen blocked, clean it up, if it is a leak, clean up the cavity and unpack the water stove. Hope to help. Thank you!
It may be that you catch a cold after falling asleep at night, so you will have cold and diarrhea. >>>More
The wire is not connected correctly. Check the route.
It can be cleaned with strong acids, such as toilet cleaners. But rinse it off quickly, otherwise the sealing mud will be crispy soon.
Generally speaking, this phenomenon occurs when the main pipes of the upper and lower floors arrive (the ventilation pipes of the negative pipes are blocked), and if it occurs occasionally, it may also be that there are more households draining water at the same time.
The insurance practice is to close the lid so that it is most hygienic and there will be no small splashes.