-
Anonymous users2024-01-24Qinglong No. 3 sprays a transparent material on top of the tiles that can be soaked in water for a long time.
-
Anonymous users2024-01-23What kind of spray is sprayed on top of the tile, what is it called, I forgot, this thing is sprayed on it with water, and the water droplets will not seep down.
-
Anonymous users2024-01-22The solution is to deal with the gaps in the bathroom tiles.
The first method can use the most common beauty joint agent at this stage to retouch these tiles. The key to control here is that the tile should not be cracked after the seam is opened. What you need to do is to ensure that the gaps of the bathroom tiles are tight, so that the water does not penetrate down through the gaps, so that the leakage of the bathroom is fundamentally solved.
The second method is to use a waterproof adhesive that is used to repair the cracks in the restroom. This type of glue is sold in many places, and it is very simple to operate. After cleaning the gaps, you can directly brush these glues.
Be sure to knock it off and do it again The bathroom was originally a cast-in-place board It is rigid and waterproof and should be impermeable and not leaky Now it is seepage It means that the cast-in-place board has seeped water, if you do a layer of waterproof on the surface now, it is not seepage now, in case there is a little damage in the future, it will seep water, it is recommended that you knock it off to the cast-in-place board, and after cleaning it up, make a layer of waterproof layer with thickness and quality on the cast-in-place board Then rest assured.
Because after we finish the waterproof coating treatment, due to the influence of the waterproof coating, it is actually compared to the southern Xinjiang tiles pasted on the walls with waterproof treatment. If you want to smoothly paste the tile on the wall, it is recommended to use a special tile adhesive when choosing the adhesive material, because the tile adhesive will be easier to control than the ordinary cement mortar in use, and the adhesion strength is relatively sufficient, which can reduce the hollowing of the tile in the later stage to a certain extent.
Tile joint seepage first to see whether the brick joint has been filled with something, if the original filling, with a knife gently scratch the brick joint inside the thing, if you can clean it up, it is best to clean it up, and then the tile surface and tile joint spray Yijia waterproofing agent, and so on after the waterproofing agent infiltrates into the brick joint, then use the waterproof grout paste to fill the brick joint, and finally use plastic steel mud to make the waterproof edge of the ground and wall joints and wall façade joints, so that the wall seepage is treated. The above three materials are collectively known as the three musketeers of Yijia waterproof. After maintenance, it will not affect the original decoration surface, and it is not afraid of grinding or wiping. >>>More
Do waterproofing before tiling.
After the brick is pasted, we can only hope that the craftsmanship of the tile paste is good and can play a waterproof role. >>>More
Because once there is a leak due to the problem of the waterproof layer, the first will make the ground often damp and mildew, and the second leakage is more serious, the water will leak along the cracks or small holes in the wall to the neighbors, and when this situation occurs, it will cause a lot of trouble and high costs, you have to bear the cost of repairing the wall and the downstairs ceiling, and there may be other compensation.