Toilet installation, the height of the sewer pipe is not higher than how much is better

The installation of the toilet sewer pipe must be accurate, and the socket should be glued, and all plugs must be plugged to the end. After the installation, the hole through the floor slab should be carefully filled with cement mortar to prevent water seepage in the future. After the water pipe is ready, the reserved water nozzle should be wrapped to prevent the cement from falling.

The toilet drain is 400 meters from the wall and is as high as the floor, or less than one centimeter high.

You can make it higher, and when the floor is done, the installer will gently knock on the floor with a small hammer when installing the toilet, which will not hinder the installation of the toilet and will not leak.

1. After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test. >>>More

After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test. Regardless of these basically experienced masters, they know that the bathroom installation master who is looking for Master Wan does not need to consider these problems at all, and the more experienced master will basically do. >>>More