Can hardwood flooring be paved directly on concrete floors?

Yes, but it depends.

Whether the solid wood floor can be directly laid on the cement floor, this problem should be seen according to the situation: if the ground base is good, you can not do the wooden keel, but you need to do a good job of moisture-proof treatment, you need to wipe the ground with a mop cloth and then dry, and then lay the floor with moisture-proof film.

When the original ground at home is uneven or unscreed, it is not possible to lay the wooden floor directly, and the wooden keel should be used as a base. The wooden keel generally chooses a cross-sectional size of 40mm and 40mm, and the cross-sectional size of 40mm and 60mm is used in places with a large amount of personnel activity.

Whether the solid wood floor can be directly laid on the cement floor depends on the situation

If the ground base is good, you can not make a wooden keel, but you need to do a good job of moisture-proof treatment. First of all, the floor is wiped with a mop cloth and dried, and the moisture-proof film is covered before the floor is laid.

When the original ground at home is uneven or unscreed, it is not possible to lay the wooden floor directly, and the wooden keel should be used as a base. The wooden keel generally chooses a cross-sectional size of 40mm and 40mm, and the cross-sectional size of 40mm and 60mm is used in places with a large amount of personnel activity. Before installation, the underside of the wooden keel was brushed with anticorrosive paint 2 or 3 times.

After the installation of the wooden keel should be planed, the solid wood floor should be fixed with spiral nails, and if possible, buy some insect repellent and place it in the keel, which can extend the service life of the keel.

In the case of economic permitting, in places with a large amount of personnel activities (such as places where parties are often held), after paving the wooden keel, add a large core board on the keel, the effect is better, the foot feeling is very good when walking on it, and the quality is not easy to have problems.

After the wooden floor is paved, there should be an expansion gap of 5 to 10mm between the wooden floor and the surrounding wall, and it should be pressed with a baseboard to not expose the "horse's feet". The joints between the wooden floors should be tight, leaving no traces, the joints should be staggered, the nails should be firm, and there should be no loose feeling when walking on them, and there should be no sound. The surface of the wooden floor should be polished and smooth, without planing marks, thorns, and scars, with clear wood grain, smooth texture, and uniform color.

Take my answer. I have been in the decoration industry for more than ten years, and I have seen your problem in "Decoration Information", and the solution in the magazine is similar to mine.

The solid wood floors sold on the market now generally cannot be directly laid on the cement floor, and the keel needs to be played. But the original traditional process can be directly paved, at that time the floor was square-shaped, one by one, called quartz floor, which was directly laid on the cement floor. At that time, the concrete floor was flat and calendered.

Surely no, solid wood flooring is a single-fiber wood floor, which may still be deformed by environmental changes, so it is necessary to use a wooden keel to install, and it is necessary to choose a better keel, and ask the professional workers of the factory to install, so that it will also get reliable after-sales protection.

If your floor is flat enough, you can spread it directly on the ground. If the flatness is not enough, the flooring company will definitely give you a foam or level the ground during decoration! It is recommended that you ask the flooring company to come to your home to measure before renovating, and then decide how to deal with it.

It's more affordable and saves money.